-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
In Terms of Experience, a 10,000-foot View of China
January 17, 2018 | Barry Matties, I-Connect007Estimated reading time: 21 minutes
In the past 30+ years of PCB manufacturing in China, you would be hard-pressed to find someone more connected to the pulse of the Asian market than Gene Weiner. Barry Matties met with the industry veteran at HKPCA to get his take on the show, the current and future market conditions of China, and any effect the new U.S. administration might have on trade relations going forward.
Gene Weiner at the opening ceremony of HKPCA 2017 in Shenzhen
Barry Matties: Gene, what are your initial thoughts on HKPCA 2017?
Gene Weiner: It is a great exhibition! A little while ago, walking down the aisles, I thought I was in the subway at Tokyo during rush hour. I've never seen crowds like this at prior HKPCA events. It's the biggest PCB crowd since the old NEPCON days in the ‘60s at the Coliseum in New York. The attendees are asking good questions. Many are here to buy; some are even buying equipment they didn't originally intend to buy during the show. There were many kinds of new products for sale ranging from remote verification at Orbotech to affordable 3D printing at WKK; it's just astounding.
Matties: There are a lot of people here that I did not expect to see either, as well as a lot of first-timers.
Weiner: That's true. The first-timers include a vice president of Nan Ya, James Ho, which surprised me. He had never come to this show. He always supported the TPCA, Taiwan's printed circuit show, and then the show over in Suzhou. He appeared to be thoroughly amazed at what he saw here.
Matties: There are a lot of shows, but there are very few shows in the world that have as much equipment as this, where you can really come in, kick the tires and see some options.
Weiner: Well, all of the show’s available space was totally sold out. As I understand it, there are more than 540 companies in three halls. I'm surprised at a number of things. Not only is the Chinese-built equipment more advanced, but the quality of manufacture of printed circuit equipment, ranging from cut sheet laminators down to drilling machines, is much improved over a few years ago. It is now on a global quality level. The other thing that shouldn't have surprised me is that, in the specialty chemicals, the copycats are now going after the direct metallization for the modified semi-additive processes including carbon or graphite as well as the organic metallization processes to make holes conductive and metallize other non-conductive surfaces. The number of companies offering these apparent “knock-offs” surprised me as did the size of their booths.
Aisles are filled at HKPCA
Matties: And the copycat is still an issue, and it's an issue that's just hard to reconcile, because they may shut down one brand and start the next day with another.
Weiner: Well, the answer is still to get somebody, a trusted partner, and arrange for local manufacture, assembly or subassembly whenever possible, which is difficult to do. You have to build relationships like anywhere else. It's a fast-moving industry. It's changing. We're going to see another change due to increases in wafer level packaging. This has already affected the BGA industry very negatively, and there are other new packages coming. But here, everything seems to be turning to automotive electronics. China plans to become the world’s leader in the production and use of autonomous driving and electric vehicles. China has reserved about one third of the booth space at the upcoming CES show in Las Vegas. The city of Shenzhen, where we are, has already completed electrifying all of its public transit with more than 16,000 electric buses.
Matties: Interesting that you bring that up. I was interviewing Phil Carmichael, president of IPC China/Asia. He was mentioning electric vehicles. In China, he explained that license plates are very expensive. Sometimes it's half the cost of the car, I guess. Depending on the car it could be $10,000, $15,000 just to get a license. But the EV, there's no fee for the license, and it's creating a demand.
Weiner: Yes, it's creating a demand. The government here wants all the cars to be electric by 2025, to the point of which Ford Motors is going to introduce a bunch of hybrid and electric models. They announced it just this past week while we were here. The Chinese government is also clamping down on truck companies to focus on the qualified ones that will build quality vehicles that are efficient. Now, it is interesting to note, just before I boarded my plane in Boston, I saw a newsflash that Tesla is setting up a factory here, and what is even more interesting is that they're talking about autonomous driving trucks, tractor-trailers, like an 18-wheeler that can carry a full load for 600 miles and still be autonomous driving.
I envision pictures of a caravan of these without a driver making major deliveries across most of the country. I'd like to see it in the States instead of some of the Mexican trucks that don't meet our safety standards coming across our Southern border. The autonomous driving trucks could be a lot safer and better, but there's a huge, huge challenge for the printed circuitry. The specifications and standards are still being written as they're going forward, and at the same time, we're switching from 6 and 12 volts to 24 volts and 36 volts. Some are using old components that are not yet tested to the new performance demand levels. They have to check the reliability in extremely high humidity conditions. There will unbelievably high temperature rises on cars that will challenge the circuit substrates sensors.
How do you test for that? Bosch told me that they will run a test cycle of 10 seconds between sub-zero and 175°C in the future. There is nobody equipped yet to test to that level or to even set up those tests. That's going to be an interesting during the next few years as these systems get on the road. If we look less than 10 years down the road, 50% of the value of a car is going to be in electronics. And we're going to see more open housings, and more plastic housings instead of metal. We're going to reduce weight. We have to dissipate heat. We have to get airflow. We're going to see more heat on the switching because these are always on, whether they're charging or running, it's an always-on condition, so there's always heat generation. We will see increases in highly automated driving in many vehicles before we see fully automated cars.
Everything is changing. I'm going to be visiting Ventec shortly, and they have developed, which I saw in Germany at productronica, a laminate that dissipates heat that's copper on one side for the circuitry, aluminum on the other. There were three circuits in a headlamp assembly with the aluminum side bonded to a heat sink. The part was designed to be dropped into a Mercedes C200.
Page 1 of 3
Suggested Items
MKS’ Atotech to Participate in ECTC
05/10/2024 | MKS’ AtotechAt this year’s 74th IEEE Electronic Components and Technology Conference (ECTC), MKS’ Atotech will present and demonstrate its latest product and service innovations.
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.