-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Estimated reading time: Less than a minute
Lightning Speed Laminates: Skin Depth and Its Interaction with Final Plated Finishes
Skin depth is the depth within a conductor where the majority of the radio-frequency (RF) current resides. Imagine looking at a cross-sectional view of a circular wire and being able to see how much current is within that cross-section. If the current is supplied by a battery and is direct current (DC), the amount of current is distributed evenly across the cross-sectional area of the wire. The current density is the same everywhere in the area of that wire.
If you change the current source to a sinusoidal alternating current, then you will find that there is more current on the outer edges of the wire than in the middle of the wire. If you increase the frequency a lot, you will notice at some point there is no current in the middle of the cross-sectional area of the wire, and the majority of the current is on the very outside edge (skin) of the conductor. That is the basic concept for skin depth.
To read this entire column, which appeared in the December 2018 issue of Design007 Magazine, click here.
More Columns from Lightning Speed Laminates
Lightning Speed Laminates: Millimeter-wave Properties and PCB Design ChallengesLightning Speed Laminates: Optimizing Thermal Management for Wireless Communication Systems
Lightning Speed Laminates: Test Vehicles for PCB Electrical Material Characterization
Lightning Speed Laminates: Optimum Thermal Stability Considerations
Lightning Speed Laminates: Thermal Management Isn’t Getting Easier
Lightning Speed Laminates: Benefits of High-Performance Hybrid Multilayer PCBs
Lightning Speed Laminates: An Overview of Copper Foils
Lightning Speed Laminates: The Importance of Circuit Features for Millimeter-Wave Applications