-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Growing Industry
In this issue of PCB007 Magazine, we talk with leading economic experts, advocacy specialists in Washington, D.C., and PCB company leadership to get a well-rounded picture of what’s happening in the industry today. Don’t miss it.
The Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Preparing to Enter the Workforce With PCB Design Experience
April 22, 2019 | Nolan Johnson, PCB007Estimated reading time: 2 minutes
I spoke with Alex Burt, a computer engineering student at George Fox University, at a well-attended college career fair on the GFU campus in Newberg, Oregon. In the interview, Alex discusses his PCB classwork, challenges of design, and how it has impacted his internship experience as he prepares to enter the workforce upon graduation in the spring semester of 2019.
Nolan Johnson: Great to meet you, Alex. Can you tell me about the company you work for and what you studied in school?
Alex Burt: I currently work as a software intern at Summit Wireless in Beaverton, Oregon, and I am a computer engineering major at George Fox University. I'm graduating in the spring of 2019.
Johnson: Did you have the opportunity to go through the PCB process at George Fox as an undergraduate?
Burt: Yes.
Johnson: Tell us a little bit about that from the student's perspective. What was involved in that?
Burt: I was completely new to PCB design at the start. But through our electrical engineering class that Gary Spivey teaches at George Fox, we worked with Altium to understand how to create components on a PCB, create their footprints for a PCB, route these devices together, and create a full circuit not based on a breadboard.
Everything we had been doing in our electrical engineering classes had been based off a breadboard, and in one semester, we had two classes where we built two different PCBs. In one of the classes taught by Dr. Natzke, we built a custom amplifier, housed with speakers, which is something that wouldn't have been possible on a normal breadboard. But through designing the PCB, we reduced noise levels and made it compact enough for permanent deployment in an actual device.
Overall, I knew nothing about PCBs before these classes, but now I can say that I could design an entire circuit on a PCB and have it sent out to a manufacturer or use our in-house PCB lab at George Fox. We can print out solder paste or print traces with the Voltera machine. We also have a pick-and-place machine to place surface mount components, and then we put it in the solder oven. But if we don't do it in-house, then we would put fiducials on it and send it out that way too. All of our surface mount components have gone through the Voltera to put the solder mask layer on; we've placed all the components with the pick-and-place machine, put it in the oven, and these devices all work.
To read this entire interview, which appeared in the March 2019 issue of Design007 Magazine, click here.
To learn more about George Fox University's Engineering program click here.
Suggested Items
Indium Experts to Present on High-Temperature, Lead-Free Solder Paste and High Reliability Liquid Metal Alloys Poster at ECTC
05/16/2024 | Indium CorporationIndium Corporation Research Associate Kyle Aserian will deliver a presentation at the 74th Electronic Components and Technology Conference (ECTC) on May 31, in Denver, Colorado.
Indium Experts to Present at Electronics in Harsh Environments SMTA Conference
05/13/2024 | Indium Corporationndium Corporation Technical Manager for Europe, Africa, and the Middle East, Karthik Vijay, will deliver a technical presentation and Indium Corporation Senior Technologist, Dr. Ronald Lasky, will deliver both a workshop and technical presentation at the Electronics in Harsh Environments SMTA Conference on May 14-16 in Copenhagen, Denmark.
Connect the Dots: Designing for Reality—The Pre-Manufacturing Process
05/08/2024 | Matt Stevenson -- Column: Connect the DotsI have been working with Nolan Johnson on a podcast series about designing PCBs for the reality of manufacturing. By sharing lessons learned over a long career in the PCB industry, we hope to shorten learning curves and help designers produce better boards with less hassle and rework. Episode 2 deals with the electronic pre-manufacturing process. Moving from CAD (computer-aided design) to CAM (computer-aided manufacturing) is a key step in PCB manufacturing. CAM turns digital designs into instructions that machines can use to actually build the PCB.
AIM Solder Signs Shinil Fl Ltd. as New Distributor for Korea
05/08/2024 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce a new distribution partnership with Shinil Fl Ltd., a prominent supplier of technological solutions in the SMT and semiconductor sectors.
Indium Corporation to Showcase HIA Materials at ECTC
05/07/2024 | Indium CorporationAs an industry leader in innovative materials solutions for semiconductor packaging and assembly, Indium Corporation® will feature its advanced products designed to meet the evolving challenges of heterogeneous integration and assembly (HIA) and fine-pitch system-in-package (SiP) applications at the 74th Electronic Components and Technology Conference (ECTC), May 28‒31, in Denver, Colorado.