Checking In With ICAPE Group
April 3, 2024 | Nolan Johnson, I-Connect007Estimated reading time: 2 minutes
ICAPE Group’s field application engineer Erik Pederson drills down on sustainability, supply chain resiliency, and what value engineering really looks like in this exclusive interview. Founded in 1999, European-based ICAPE Group provides 21 million printed circuit boards and over six million technical parts to manufacturers every month. With 30 PCB manufacturing partners globally and 50 partners providing a wide array of technical parts, ICAPE Group has operations in China, Taiwan, Thailand, South Korea, Vietnam, South Africa, Europe, Mexico, and the United States. The company also focuses on the value proposition for its customers.
Sustainability
Nolan Johnson: How does ICAPE Group incorporate sustainable practices into manufacturing printed circuit boards?
Erik Pederson: There are many things that we do in the process of manufacturing a PCB that focuses on sustainability. PCB fabricators reclaim precious metals from waste and have done so for many years, sending it out to salvage companies that reclaim the metals. Regarding epoxy fiberglass laminate, we can grind it down to small particles that can be used as filler material in things like construction and concrete. As far as the processes themselves, we minimize waste and reclaim materials in as many steps as possible. On the electrolytic copper plating line, when the small copper balls (anodes) are sufficiently depleted, we collect them and send them to salvage for recovery. It is also common to collect router dust from drilling and routing to reclaim especially the gold particles. We reclaim the HASL and precious metals from rinsing during the wet processes. In the etch process, the spent etchant is treated to remove the copper, which is also recovered. This has all been going on for many years, but for someone unfamiliar with the fabrication process, it is important to educate them on all we do to reduce waste.
Johnson: Today, sustainability is not something we only think about during the manufacturing process. PCB fabricators have been focused on environmental sustainability, reducing waste, and maximizing ROI in many ways for decades. Working toward better sustainability really should start long before the board arrives at the PCB shop, correct?
Pederson: That is correct, Nolan. Probably the most important thing we do is to work on sustainability with our customers at the design stage. What are the most (ENIG) and least impactful (OSP) surface treatments to the environment? What is the cost? We also promote the use of halogen-free material. It is my personal belief that customers should pay more attention here. The halogens used to make the fire-retardant materials remain even when you grind down the waste materials. They are harmful to the environment. Today, there are halogen-free materials that have as good a performance as halogen materials, but they cost 20–30% more. But if most PCB makers (and OEMs) would use halogen-free material, the market would drive the price down and they would become more common, addressing a significant environmental issue. One example is NOKIA and Samsung requiring halogen-free material for their PCBs.
To read this entire conversation, which appeared in the March 2024 issue of PCB007 Magazine, click here.
Suggested Items
PCB Market Size to Grow by $29.06B from 2024-2028
05/17/2024 | PRNewswireThe global printed circuit board (PCB) market size is estimated to grow by USD 29.06 bn from 2024-2028, according to Technavio. The market is estimated to grow at a CAGR of over 6.6% during the forecast period.
Material Insight: The Dielectric Constant of PCB Materials
05/17/2024 | Dr. Preeya Kuray -- Column: Material InsightIn the world of PCB design, miniaturization can be achieved by using low dielectric constant (Dk) materials. Low Dk materials can allow for a reduction in thickness while maintaining a given trace width, leading to lower transmission loss and higher density circuitry.
The ICAPE Group Reports Revenue for Q1 2024
05/16/2024 | ICAPE GroupThe ICAPE Group, a global technology distributor of printed circuit boards (PCB) and custom-made electromechanical parts, announced its revenue for the first quarter of 2024.
IPC Releases May 2024 Global Sentiment of the Electronics Supply Chain Report
05/16/2024 | IPCSentiment among electronics manufacturers fell this month, after hitting a new high in April. Despite the decline, sentiment remains historically high according to IPC’s May Sentiment of the Global Electronics Manufacturing Supply Chain Report.
Real Time with... IPC APEX EXPO 2024: Electra's Passion for Inkjet Solder Mask Technology
05/15/2024 | Real Time with...IPC APEX EXPODon Monn, national sales manager for Electra Polymers, discusses his transition to Electra and the benefits of inkjet solder mask technology. He emphasizes the significance of product passion and understanding customer issues. Don also outlines Electra's mission and expansion plans, and addresses the current state of the PCB market and the importance of education.