Airbus Achieves Eurodrone’s Preliminary Design Review
May 16, 2024 | AirbusEstimated reading time: 1 minute
The Eurodrone programme has successfully performed the Preliminary Design Review (PDR). Led by Airbus Defence and Space as prime contractor, this major programme milestone has been completed with OCCAR and representatives of the four customer nations (France, Germany, Italy and Spain) in the presence of the three Major Sub-Contractors (MSC), Airbus Defence and Space Spain, Dassault Aviation and Leonardo.
The PDR proves that the initial design of the aircraft has consistently matured, paving the way to proceed with the detailed design. It is the outcome of different technical assessments and evaluations conducted, such as Wind Tunnel Testing to confirm the aerodynamic configuration of Eurodrone, the overall design to ensure demonstration of operational capability, and the validation of a fully representative Digital Twin. From the very beginning, the Eurodrone programme benefits from both design philosophies – physical and digital.
Supported by and based on the knowledge already gathered, the Eurodrone programme enters into a new phase to reach the Critical Design Review (CDR), which will represent the final step and closure of architecture and system design.
“Performing the Preliminary Design Review for the development of Eurodrone represents an important step forward for this key European defence programme”, said Jean-Brice Dumont, Head of Air Power at Airbus Defence and Space. “It shows a real joint effort and collaborative spirit from all industrial partners and the Customer community to ensure European sovereignty and independence in this critical segment of unmanned long endurance ISTAR capability.”
Provided with innovative cutting-edge technology and designed to become one of the main pillars of any future combat air system, the Eurodrone will be an indispensable capability to facilitate international conflict prevention and crisis management, ensuring operational superiority to the nations, especially in the context of Intelligence, Surveillance, Target Acquisition and Reconnaissance (ISTAR) missions.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/31/2024 | Marcy LaRont, PCB007 MagazineThis week, our columnists enjoy particular attention with Barry Olney, Mehul Dave, and Happy Holden all providing valuable insight on materials, the critical importance of the front-end engineering process once a PCB design is received, and an overview and observations around IPC APEX EXPO technical sessions.
Bell Awarded Funding for Phase 1B of DARPA Speed and Runway Independent Technologies (SPRINT) X-Plane Program
05/30/2024 | BellBell Textron Inc., a Textron Inc. company, has been down-selected for Phase 1B of Defense Advanced Research Projects Agency (DARPA) Speed and Runway Independent Technologies (SPRINT) X-Plane program.
Cambridge GaN Devices Signs MoU with ITRI Covering GaN-based Power Supply Development
05/30/2024 | BUSINESS WIRECambridge GaN Devices (CGD), the fabless, clean-tech semiconductor company, dedicating to develop energy-efficient GaN-based power devices that make greener electronics possible, has signed a Memorandum of Understanding with Industrial Technology Research Institute (ITRI) of Taiwan to solidify a partnership in developing high performance GaN solutions for USB-PD adaptors.
Connect the Dots: Designing for Reality—The Physical Manufacturing Phases
05/30/2024 | Matt Stevenson -- Column: Connect the DotsDesigning for reality is focused on the art and science of PCB design and production. If you’re trying to make a PCB that stands out for being reliable, easy to manufacture, and meets all design goals, then you’re in the perfect spot. We’re here to break down the PCB manufacturing process while sharing essential tips for smooth design and production.
Elementary, Mr. Watson: Pushing Design Boundaries
05/29/2024 | John Watson -- Column: Elementary, Mr. WatsonOverconstraint: What a concept. Our first thoughts would be: What are we hurting by overconstraining a design? Isn't it better to be safe than sorry? What is meant by overconstraint? It means to apply excessive constraints. In engineering and mathematics, it's used when there are too many simultaneous equations to result in an exact solution. For example, fitting a line to many points is overconstrained because a line cannot be drawn simultaneously through all of the points. In PCB design, overconstraints always occur, including dimensional, electrical, manufacturing, and timing constraints. The list goes on.