AIM’s Karl Seelig to Present at SMTA Guadalajara Expo & Tech Forum


Reading time ( words)

AIM Solder is pleased to announce that Karl Seelig, V.P. of Technology, will present at the SMTA Guadalajara Expo & Tech Forum, scheduled to take place October 5th – 6th, 2016 at the RIU Hotel Guadalajara in Guadalajara, Mexico.

Seelig’s presentation on AIM’s latest white paper, titled “The Impact of Reduced Solder Alloy Powder Size on Solder Paste Print Performance,” will take place in “Sala A” at technical forum from 4:00 PM – 5:00 PM. This presentation will highlight the use of finer metal powder into solder paste to facilitate ultra-fine pitch printing. The study was conducted to evaluate the benefits derived from smaller particle size and identify possible negative implications.

With over 30 years of industry experience, Karl Seelig has written and presented numerous technical papers on topics including lead-free electronics assembly, no-clean flux technology, assembly & process optimization, inspection, and metallurgical studies.  Mr. Seelig serves as the Chairman of the IPC Solder Products Value Council and has been involved in the development of material specifications under IPC.  He has also received numerous patents in soldering technology, including four lead-free solder alloys.

About AIM

Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products such as solder paste, liquid flux, cored wire, bar solder, epoxies, lead-free and halogen-free solder products, preforms, and specialty alloys such as indium and gold for a broad range of industries. A recipient of many prestigious SMT industry awards, AIM is strongly committed to innovative research and development of product and process improvement as well as providing customers with superior technical support, service and training. For more information about AIM, visit www.aimsolder.com.

Share

Print


Suggested Items

SMTAI 2019: Chris Bastecki on Low-temperature Solder Challenges and Products

10/14/2019 | Real Time with...SMTAI
Chris Bastecki, director of global PCB assembly at Indium Corporation, discussed challenges of low-temperature solder and the company's new product, Durafuse LT, which provides novel properties and reliability.

Real Time with... SMTAI 2019 Video Interviews

10/09/2019 | Real Time with...SMTAI
The SMTA International Conference and Exhibition 2019, which took place September 22–26, 2019, at the Donald E. Stephens Convention Center in Rosemont, Illinois, concluded successfully. For those of you who were not able to make it to the show, catch our video interviews with the movers and shakers of the electronics industry. We've updated our video presentation for a better experience for our users, so check it out!

SMTAI 2019: Happy Holden’s On-the-Scene Report

10/03/2019 | Happy Holden, I-Connect007
Last week concluded the 2019 SMTAI conference in Rosemont, Illinois. Overall, I think the show was successful and covered all aspects of SMT processes.



Copyright © 2019 I-Connect007. All rights reserved.