Aqueous Technologies to Hold Atlanta Reliability – Best Practice Workshop


Reading time ( words)

In the demanding world of electronic assembly, profits and losses are influenced directly by reliability. Today’s customers demand the highest levels of product reliability frequently at the lowest possible costs.

In line with this, Aqueous Technologies will be holding the Atlanta Reliability – Best Practice Workshop on October 13, 2016 in Duluth, Georgia.

The workshop features experts from several fields all pertaining to reliability. This free workshop features experts covering: cleaning (equipment and process); cleaning materials; cleanliness assessment; and soldering materials, among others.

The panel of expert speakers will present relevant technical data, best-practices, and other helpful information designed to assist engineers in their quest for improved reliability.

For more information or to register, click here.

Share

Print


Suggested Items

High-reliability, Low-temperature Solder Alloys

05/18/2020 | Dr. Pritha Choudhury, MacDermid Alpha Electronics Solutions
Increased digitalization and greater connectivity have been driving miniaturization and more complex and integrated designs in electronics. As the real estate on PCBs shrinks, so does the size of packages. However, the drive for finding design solutions for increased performance has continued to expand. The solder joint is an essential part of assemblies for electronic devices as it provides electrical, thermal, and mechanical connections. Therefore, soldering materials have been evolving to enable such a technological revolution.

UV-curable Materials and Conformal Coatings

12/23/2019 | Pete Starkey, I-Connect007
Pete Starkey and Phil Kinner, global business and technical director, coatings division, Electrolube, discuss the characteristics and benefits of the company’s new UV-cured conformal coatings. Phil also describes the development of coatings for critical avionics applications and Electrolube’s collaboration with the U.K. National Physical Laboratory to establish a new condensation test.

IPC Electronics Materials Forum 2019

10/16/2019 | IPC
IPC will be holding its Electronics Materials Forum 2019 from November 5–7, 2019, in Bloomington, Minnesota. The Electronics Materials Forum is a new technical conference focused on developments in materials and processes associated with advanced electronics assembly and manufacturing.



Copyright © 2020 I-Connect007. All rights reserved.