Metcal to Exhibit at the SMTA New England Expo


Reading time ( words)

Metcal will exhibit at the SMTA New England Expo, scheduled to take place Thursday, November 3, 2016 at the DCU Center in Worcester, Massachusetts. Company representatives will showcase the Metcal USF-1000 Solder Wire Feeder, along with Metcal's proven rework and repair equipment, including the Scorpion Rework System and MX-5200 Soldering System.

The new Metcal USF-1000 Solder Wire Feeder adds a new level of control and convenience to the soldering process. Designed to integrate easily with Metcal’s MX-5200 or MX-500 series solder systems, the Solder Wire Feeder increases soldering speed while it eliminates wasteful tangles and unspooling.

The Scorpion redefines precision and addresses the technical demands presented by component manufacturers today. Metcal's Automatic Placement Package is capable of 50mm of motorized travel in the Z-axis and a full 360° in ϴ (Theta). The Automatic Placement Package offers fine motor control in the Z-axis and ϴ during alignment of the component to the pad. The new force feedback control during the placement process enables the unit to accurately pick and place components without disturbing the component or solder.

The MX-5200 series features a dual-simultaneous use option, meaning that two hand-pieces can work from one power supply at the same time. The dynamic option enables the two hand-pieces to share 80 watts output power based on demand, adding even more application flexibility and speed.  Four different hand-pieces and a comprehensive range of soldering and rework cartridges support the MX-5200 Series simultaneous dual operation. These include the Metcal Advanced Hand-Piece for SMD rework, a Metcal Ultra-Fine Hand-Piece for fine access, a Precision Tweezer capable of removing a range of components from 0201 chips to 28mm SOICs, and a Desoldering Gun for safely removing through-hole components.

About Metcal 

Since 1982, Metcal has been a recognized worldwide leader in the electronics assembly marketplace. As part of OK International, Metcal's industry-leading position addressing advanced technology in conduction soldering and rework/repair, has and will continue to broaden to a full electronics bench tool single-source solution. Metcal product lines currently include: hand soldering and desoldering, convection rework products, fume extraction and fluid dispensing tools. For more information, click here.

Share

Print


Suggested Items

High-reliability, Low-temperature Solder Alloys

05/18/2020 | Dr. Pritha Choudhury, MacDermid Alpha Electronics Solutions
Increased digitalization and greater connectivity have been driving miniaturization and more complex and integrated designs in electronics. As the real estate on PCBs shrinks, so does the size of packages. However, the drive for finding design solutions for increased performance has continued to expand. The solder joint is an essential part of assemblies for electronic devices as it provides electrical, thermal, and mechanical connections. Therefore, soldering materials have been evolving to enable such a technological revolution.

Process Ionic Contamination Test (PICT) Standard Roundtable With Industry Experts

04/22/2020 | I-Connect007
With standards committees set to release the first of four new test standards, industry experts discussed the process ionic contamination test (PICT) standard, which was recently approved by the IEC for publication. Roundtable participants included Teresa Rowe, senior director of assembly and standards technology at IPC, Graham Naisbitt, chairman and CEO of Gen3, Jason Keeping, corporate process development at Celestica, and Doug Pauls, principal materials and process engineer at Collins Aerospace.

SMTA Europe’s Electronics in Harsh Environments Conference and Exhibition: A Taste of Things to Come

04/14/2020 | Pete Starkey, I-Connect007
SMTA Europe’s Electronics in Harsh Environments Conference has become a must-attend annual event; unfortunately, it also became another casualty of the COVID-19 lockdown. Scheduled to take place in Amsterdam, the Netherlands, from April 21–23, 2020, it has now been postponed until December 1–3. Pete Starkey reports on a preview seminar presented by SMTA Europe.



Copyright © 2020 I-Connect007. All rights reserved.