Indium VP of Technology to Lead High-Reliability Solder Materials Workshop at LED A.R.T. Symposium


Reading time ( words)

Indium Corporation's Dr. Ning-Cheng Lee, Vice President of Technology, will lead a workshop titled Materials Considerations for Achieving High-Reliability Lead-Free Soldering at the LED Assembly, Reliability & Testing Symposium in Atlanta, Georgia on December 1.

As the electronics industry rapidly advances toward miniaturization, two drivers dictate manufacturer success: low-cost and high-reliability. This course examines the roles of solder composition on cost and reliability, including a review of material properties, soldering performance, known failure modes, and the primary merits of alloys. 

Dr. Lee is a world-renowned soldering expert and an SMTA Member of Distinction. He has extensive experience in the development of high-temperature polymers, encapsulates for microelectronics, underfills, and adhesives. His current research interests include advanced materials for interconnects, and packaging for electronics and optoelectronics applications, with an emphasis on both high-performance and low cost of ownership. 

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, thermal management, and solar markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, Indium has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA. 

For more information about Indium Corporation, click here or email abrown@indium.com.

Share

Print


Suggested Items

Excerpt: The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 1

04/08/2021 | Brent Fischthal, Koh Young America
Today, optical inspection systems are the preferred solution for in-line quality control in the SMT industry. Systems such as solder paste inspection (SPI) or automated optical inspection (AOI) systems for pre- and post-reflow are almost standard in every production facility.

Real Time With… Premium Sponsors Share ‘Top 5 Things You Need to Know’

03/05/2021 | I-Connect007
As part of I-Connect007’s coverage of the IPC APEX EXPO 2021, four premium sponsors share their knowledge and expertise in the following categories.

What Makes a Good Process Engineer?

03/03/2021 | Nolan Johnson, I-Connect007
Nolan Johnson recently spoke with Tuan Tran, director of customer solutions at Green Circuits, about what makes a successful process engineer. They also discuss a typical day in the life of a process engineer—from pre-manufacturing through post-DFM, for process improvement. As Tuan points out, there are a variety of paths to becoming a great process engineer.



Copyright © 2021 I-Connect007. All rights reserved.