ACE December 6-7 Selective Soldering Workshop Sold Out – 2017 Sessions Available


Reading time ( words)

ACE Production Technologies' upcoming December 6-7 introductory selective soldering workshop is completely sold out. 

The next available introductory workshop will be held January 24-25, 2017 at ACE’s Spokane Valley, WA facility.  This comprehensive 2-day workshop is designed to educate and enhance an attendee’s working knowledge of the overall selective soldering process.  Topics include component limitations, clearance restrictions, flux chemistries, no-clean processing, and solder joint reliability issues, as well as problem solving and process optimization. The classroom portion will be conducted by well-known process expert Bob Klenke of ITM Consulting while the hands-on portion will be taught by the expert staff members in the ACE application lab.  Optionally, attendees can attend a third day for additional hands-on training and are invited to bring their own circuit boards for detailed application analysis. 

More than 225 attendees from over 115 companies have participated in previous ACE selective soldering workshops including a 2-day introductory workshop and a 2-day advanced workshop.  These highly successful workshops feature open communications and a continuous flow of information that has helped attendees advance their skills, techniques and methods involved with the selective soldering process. 

These workshops feature a combination of classroom and hands-on curriculum that significantly compresses the learning curve for those new to the selective soldering process or those who wish to advance their in-depth knowledge.  For more information about these selective soldering workshops, or to register for a workshop, contact Rae Ann Miller at rmiller@ace-protech.com or call 509-924-4898, ext. 102. 

About ACE

ACE Production Technologies, Inc. designs and builds simple and affordable selective soldering and lead tinning systems suitable for lead-free and tin-lead electronics assembly.  ACE’s complete line of rugged and reliable selective soldering systems all feature lead-free compatible solder pots and are ideal for low, medium or high volume production.  ACE also provides solderability testing, lead tinning services and process development services.  For more information, visit www.ace-protech.com, call 509-924-4898 or email sales@ace-protech.com

Share

Print


Suggested Items

Excerpt: The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 1

04/08/2021 | Brent Fischthal, Koh Young America
Today, optical inspection systems are the preferred solution for in-line quality control in the SMT industry. Systems such as solder paste inspection (SPI) or automated optical inspection (AOI) systems for pre- and post-reflow are almost standard in every production facility.

Real Time With… Premium Sponsors Share ‘Top 5 Things You Need to Know’

03/05/2021 | I-Connect007
As part of I-Connect007’s coverage of the IPC APEX EXPO 2021, four premium sponsors share their knowledge and expertise in the following categories.

What Makes a Good Process Engineer?

03/03/2021 | Nolan Johnson, I-Connect007
Nolan Johnson recently spoke with Tuan Tran, director of customer solutions at Green Circuits, about what makes a successful process engineer. They also discuss a typical day in the life of a process engineer—from pre-manufacturing through post-DFM, for process improvement. As Tuan points out, there are a variety of paths to becoming a great process engineer.



Copyright © 2021 I-Connect007. All rights reserved.