Engineered Materials Systems Introduces Fast Cure Conductive Adhesive for Small- to Medium-Size Chip Bonding


Reading time ( words)

Engineered Materials Systems today announced its new EMS 561-854 Fast Cure Conductive Adhesive for die-attach applications with small- to medium-size die and tantalum capacitors. EMS 561-854 is designed to cure in one minute at 170ºC.

The adhesive is stress-absorbing, designed to withstand the rigors of thermal cycling, and features excellent conductive stability. The material can be applied by pin transfer or needle dispensing.

The 561-854 conductive die attach adhesive is the latest addition to Engineered Conductive Materials’ full line of conductive adhesives for circuit assembly applications. For more information about the EMS 561-854 Fast Cure Conductive Adhesive or to learn how Engineered Material Systems can define, develop and create an engineered material solution that is right for your company.

 

About Engineered Material Systems 

Engineered Materials Systems, Inc. (EMS) technology focus is on electronic materials for semiconductor, circuit assembly, photovoltaic, printer head, camera module, disk drive and photonics assembly product lines. The company creates continual improvements that will guide its customers into the future. 

 

 

Share

Print


Suggested Items

Meet Christine Davis, I-Connect007 Columnist

12/23/2020 | I-Connect007 Editorial Team
Meet Christine Davis, one of our newest columnists! Christine will share her expertise and lessons learned through her journey as one of the few women in the electronics industry to found and run her own company.

SMTA Europe Solder Finish Webinar Addresses Defects Causes and Cures

12/14/2020 | Pete Starkey, I-Connect007
“What is your most common PCB problem?” A survey conducted by Bob Willis had revealed finish solderability to be the predominant contender, and it was clear that the choice of solderable finish applied to surface mount boards could have a significant effect on the assembly yield and cost of the final circuit. SMTA Europe organised an informative and enlightening webinar this month entitled “Guide to PCB Solder Finishes—Process Defects Causes and Cures,” with soldering specialist Bob Willis as presenter.

What Is Digital Twin Technology, and Why Is It So Important?

09/09/2020 | Happy Holden, I-Connect007
Happy Holden describes how Siemens' 12-part webinar series, “Implementing Digital Twin Best Practices From Design Through Manufacturing,” is an excellent series designed to educate the electronic manufacturing engineer on the progress of using a digital thread to improve products and performance.



Copyright © 2021 I-Connect007. All rights reserved.