Electrolube Contact Lubricants Extend Switch Lifetime

Reading time ( words)

Electrolube’s Contact lubricants have been proven to extend the lifetime of switches by more than 300%, increasing performance in a variety of applications and preventing the need for expensive maintenance. The specially formulated greases and oils are designed to reduce friction, wear and enhance the electrical performance of current carrying metal interfaces. Typically electrically insulative in thick films, contact lubricants are particularly effective in ultra-thin films as they allow the current to flow. As no metal interfaces are entirely even and smooth, the lubricants are applied to such surfaces in thin films and completely fill in all surface imperfections, which in turn improves contact and electrical performance as well as prolonging the contact life by reducing hot spots, frettage and arcing.

By filling in the air gaps between the contacts, contact lubricants also dramatically increase the effective surface area, preventing arcing and the related temperature rise and oxide formation. They also provide a barrier to airborne contamination and reduce the effects of friction by facilitating smooth movement. In addition, the use of contact lubricants are typically evaluated for their ‘feel’ characteristics, improving the quality of movement of a switch or in simple plastic/plastic contacts, for example.

To extend the performance of switches, there are many practical considerations that must be taken into account. One of the most common factors to consider is whether there are any plastics surrounding the contact area. Plastics compatibility can vary depending on the type of plastic and lubricant being used. More sensitive plastics, such as polycarbonate, require a specialist lubricant formulated using synthetic base oils, such as Electrolube’s CG60. In the case of less sensitive plastics, such as polyamide, mineral oil based lubricants may be suitable and in some cases can provide enhanced electrical performance.

Electrical performance is evaluated by measuring the mV drop of the contacts/switches over a specified number of cycles. This is usually in excess of 20,000 usage cycles. The performance of various contact lubricants can vary depending on the formulation and intended end use. For example, some materials have a more stable low mV drop over a large number of cycles but compromise on their plastics compatibility. It is therefore important to consider all electrical requirements, material compatibility and environmental influences when choosing the correct lubricant.

Environmental influences can include temperature changes, humidity exposure and corrosive atmospheres, which can affect the consistency of the contact lubricant and in turn result in reduced performance, particularly in terms of reducing friction. Temperature changes can also result in a difference in compatibility of materials, for example, at higher temperatures the plastics compatibility may be reduced. It is therefore vital that the operating temperature range of the connector or switch is compared to the operating temperature range of the lubricant and ‘in use’ tests are performed.

Humid environments are common and most contact lubricants will withstand high humidity for prolonged periods. Electrolube designed a series of tests to illustrate different environments and can provide further assistance with correct product selection. Following combined humidity and salt mist testing, the synthetic lubricants, such as Electrolube CG53A provided the best protection. As an extreme test, an oxidative environment containing chlorine was created and maintained at 35˚C for 2 months and results again showed that Electrolube CG53A provided exceptional protection, closely followed by CG60 and CG70.

It is vital that no matter what the application or the lubricants used previously, testing must take place. Whether it is a change in component material or an alteration to the environment or electrical requirements, many factors can alter the performance of a switch or connector. Electrolube have been the leading supplier of contact lubricants since their invention by the company’s founder in the 1950s and produce a wide range of solutions, particularly for the automotive industry. 



Suggested Items

Optimizing Solder Paste Volume for Low-Temperature Reflow of BGA Packages

07/22/2019 | Keith Sweatman, Nihon Superior Co. Ltd
In this article, Keith Sweatman explains how the volume of low-melting-point alloy paste—which delivers the optimum proportion of retained ball alloy for a particular reflow temperature—can be determined by reference to the phase diagrams of the ball and paste alloys.

Failures and Reliability in Soldering

07/09/2019 | Michael Gouldsmith and Zen Lee, Thermaltronics
The definition of failure is "the lack of success in doing or achieving something, especially in relation to a particular activity." If the activity is concerning a soldering process, such a failure can have a downstream impact far beyond the actual solder joint. In this regard, it is first necessary to understand what constitutes a good solder joint because appearance is too often deemed a success.

Low-Temperature SMT Solder Evaluation

07/05/2019 | H. Osgood, D. Geiger, R. Pennings, C. Biederman, J. Jiang, and J. Bernal, Flex Inc.
Until recently, the use of Sn/Bi-based SMT solder materials has been investigated with negative consequences for high strain rate (drop-shock) applications; thus, these alloys have been avoided. Recent advances in alloy 'doping' have opened the door to revisit Sn/Bi alloys as a possible alternative to SAC-305 for many applications.

Copyright © 2020 I-Connect007. All rights reserved.