Scienscope to Demo Its X-ray Product Line at IPC APEX 2017


Reading time ( words)

Scienscope International, a complete inspection solutions provider, will exhibit in Booth #1331 at the 2017 IPC APEX EXPO, scheduled to take place Feb. 14-16, 2017 at the San Diego Convention Center in California. Company representatives will be available for live demonstrations of Scienscope’s various PCB X-ray inspection systems and X-ray Component Counter. 

The X-ray automated component counters offer a fast, reliable solution for counting all standard SMT and TH components, including 7” to 15” reels, ESD bags, cut tape, storage tubes, JEDEC trays (including BGA counting and BGA ball counting). Extremely fast and accurate, the component counting machines are designed to increase productivity by reducing time spent using manual counters, and eliminating errors. 

Scienscope offers a variety of cabinet style X-ray systems from the X-Scope 1800 to the X-Spection 6000.  All offer the latest state-of-the-art technology including high resolution flat panel image detectors, and micro-focus X-ray source up to 130kV. The X-SPECTION 6000  is Scienscope’s most technologically advanced cabinet style X-ray inspection system and includes a programmable rotating work table.  The X-SPECTION 6000 offers the ultimate in flexibility.

In addition to cabinet style X-ray systems, Scienscope offers several fully automated inline AXI systems.  Inline AXI machines from Scienscope are fully automated but flexible enough to use in various production environments, offering the same ease of use user interface offered on the cabinet systems.

About Scienscope International

Scienscope was founded in 1994 to meet the growing need for reliable and affordable general-purpose optical and video inspection solutions for the electronics and PCB industries. The company began with basic stereo zoom microscopes used for SMT inspection and rework of circuit boards and electromechanical assemblies with a commitment to quality, value and support. Over the past 20 years, Scienscope has evolved to become a complete inspection solution provider, offering both offline and inline X-Ray systems, Video coordinate measurement systems, Video inspection systems, and microscopes to meet a wide variety of applications and manufacturing quality requirements.

Share

Print


Suggested Items

Emerging Engineers: Raviteja Boyana

04/01/2021 | Raviteja Boyana
Recent engineering graduate Raviteja Boyana discusses IPC's Emerging Engineer program and the IPC Education Foundation Scholarship, along with his mentorship with Gen3's Graham Naisbitt. Ravi has already found a job in the industry with Maxim Integrated.

IPC CFX Update v1.3

03/31/2021 | Michael Ford, Aegis Software Corp.
By the time that you read this, version 1.3 of the CFX standard should have been published. There are some very interesting additions in this release, including messages for predictive maintenance and smart energy management. As CFX is an IPC standard, the industry is assured of open content, designed to evolve Industry 4.0 manufacturing for everyone.

KIC Adds Wave Process Inspection to Product Line

03/30/2021 | Real Time with...IPC
Miles Moreau, general manager for EMEA, Americas & Australia at KIC, shares some details on the new Wave Process Inspection (WPI) solution that KIC is currently rolling out. This solution brings real-time process control capabilities to wave soldering equipment, adding and extending capabilities.



Copyright © 2021 I-Connect007. All rights reserved.