See Ersa’s Versaflex Selective, New HR 550 Rework and Complete APEX Smart Selective Soldering Package in Booth #3111


Reading time ( words)

Kurtz Ersa North America will exhibit in booth no. 3111 at the 2017 IPC APEX EXPO, scheduled to take place Feb. 14-16, 2017 at the San Diego Convention Center in California. Ersa will show the VERSAFLEX-Ultra, the award-winning HR 550 Rework system and its complete APEX Professional Selective Soldering Package.

Ersa1.jpgThe VERSAFLEX-Ultra selective solder module offers unlimited flexibility, productivity and uncompromising quality – two solder pots, either y- and x-variable or z-variable, equipped with different solder and different solder nozzles, can work in parallel.

With its revolutionary flexibility, the soldering pots are able to move freely in x-, y- and z-direction. Each soldering pot is completely independent and has no y- or x-dependencies to the other one. An anti-collision software ensures the free movement of the servo-driven axis system of the soldering pots.

Ersa2.jpgThe HR 550 hybrid rework system addresses all users with the highest requirements in terms of precision and process safety in electronic assembly rework applications. The system features a 1,500 W high performance hybrid heating element to desolder and solder SMT components up to 70 x 70 mm. A 2,400 W infrared bottom heater in three heating zones guarantees homogeneous bottom-side preheating of the complete assembly.

The complete APEX Professional Smart Selective Soldering Package consists of the Smartflow combined with its own N2 generator, and uses the same successful and proven Ersa Selective Soldering Technology as the large Ersa VERSAFLOW systems without compromising quality and accuracy. Due to its universal pallet fastening, the Smartflow can handle PCB sizes of up to 508 x 50 8 mm [20” x 20”].  The system is equipped with its own nitrogen generator and is ready to run at the highest quality and repeatability on the market for those customers making the transition from hand soldering to automated selective. 

Share

Print


Suggested Items

Excerpt: The Printed Circuit Assembler’s Guide to... SMT Inspection: Today, Tomorrow, and Beyond, Chapter 1

04/08/2021 | Brent Fischthal, Koh Young America
Today, optical inspection systems are the preferred solution for in-line quality control in the SMT industry. Systems such as solder paste inspection (SPI) or automated optical inspection (AOI) systems for pre- and post-reflow are almost standard in every production facility.

Real Time With… Premium Sponsors Share ‘Top 5 Things You Need to Know’

03/05/2021 | I-Connect007
As part of I-Connect007’s coverage of the IPC APEX EXPO 2021, four premium sponsors share their knowledge and expertise in the following categories.

What Makes a Good Process Engineer?

03/03/2021 | Nolan Johnson, I-Connect007
Nolan Johnson recently spoke with Tuan Tran, director of customer solutions at Green Circuits, about what makes a successful process engineer. They also discuss a typical day in the life of a process engineer—from pre-manufacturing through post-DFM, for process improvement. As Tuan points out, there are a variety of paths to becoming a great process engineer.



Copyright © 2021 I-Connect007. All rights reserved.