RoHS Exemptions Unlikely to Be Published Before Fall 2017


Reading time ( words)

The EU Commission and Member States continue to meet to discuss the disposition of RoHS exemption renewal requests submitted by industry in January 2015.  During their December 15, 2016 meeting in Brussels, the experts reviewed requests on: Lead as an alloying element in steel (Annex III exemption 6a); Lead as an alloying element in aluminum (Annex III exemption 6b); Lead as an alloying element in copper (Annex III exemption 6c); Lead in high melting temperature type solders (Annex III exemption 7a); Lead in a glass or ceramic other than dielectric ceramic in capacitors (Annex III exemption 7c-I), jointly with exemption request 2015-1; Lead as activator in the fluorescent powder (Annex III exemption 18b), jointly with exemption request 2015-3; Lead in solders for the soldering to machined through hole discoidal and planar array ceramic multilayer capacitors (Annex III exemption 24); and Lead in cermet-based trimmer potentiometer elements (Annex III exemption 34). 

The Commission is currently working on preparing the draft legislative proposals for these and other exemptions) which will be sent to Member States for written consultation.  The drafts will likely be published in the spring; final legislative acts could be published in the Official Journal of the EU (OJEU) in the fall at the earliest. Under the EU RoHS2, all existing exemptions were set to expire by July 21, 2016. However, all exemptions for which industry submitted a renewal application will not expire until the EU Commission completes the current ongoing review of the applications.

Share

Print


Suggested Items

High-reliability, Low-temperature Solder Alloys

05/18/2020 | Dr. Pritha Choudhury, MacDermid Alpha Electronics Solutions
Increased digitalization and greater connectivity have been driving miniaturization and more complex and integrated designs in electronics. As the real estate on PCBs shrinks, so does the size of packages. However, the drive for finding design solutions for increased performance has continued to expand. The solder joint is an essential part of assemblies for electronic devices as it provides electrical, thermal, and mechanical connections. Therefore, soldering materials have been evolving to enable such a technological revolution.

Process Ionic Contamination Test (PICT) Standard Roundtable With Industry Experts

04/22/2020 | I-Connect007
With standards committees set to release the first of four new test standards, industry experts discussed the process ionic contamination test (PICT) standard, which was recently approved by the IEC for publication. Roundtable participants included Teresa Rowe, senior director of assembly and standards technology at IPC, Graham Naisbitt, chairman and CEO of Gen3, Jason Keeping, corporate process development at Celestica, and Doug Pauls, principal materials and process engineer at Collins Aerospace.

SMTA Europe’s Electronics in Harsh Environments Conference and Exhibition: A Taste of Things to Come

04/14/2020 | Pete Starkey, I-Connect007
SMTA Europe’s Electronics in Harsh Environments Conference has become a must-attend annual event; unfortunately, it also became another casualty of the COVID-19 lockdown. Scheduled to take place in Amsterdam, the Netherlands, from April 21–23, 2020, it has now been postponed until December 1–3. Pete Starkey reports on a preview seminar presented by SMTA Europe.



Copyright © 2020 I-Connect007. All rights reserved.