Dymax Launches Easily Peelable Maskant for PWB Connectors and Board-Level Areas


Reading time ( words)

Dymax Corporation’s recently launched SpeedMask 9-7001, a light-curable maskant designed for protecting connectors and board-level areas from both solvent based and light-curable conformal coatings. Cured masks withstand wave solder and reflow temperatures and are easily removed in one piece, saving time and eliminating the concern of ionic contamination or residue left behind by other masking methods. The residue free surface after removal results in passing SIR testing per IPC-TM-650 and zero keep-out violations.  

This halogen and silicone-free maskant is compatible with gold and copper connector pins, cures upon exposure to light and is designed to provide protection of connectors with no discoloration or corrosion. It is extremely thixotropic and is ideal for manual or automated dispensing on boards or components that may be difficult to mask. 

About Dymax Corporation

Dymax Corporation develops innovative adhesive, coating, dispensing, and light-curing systems for applications in a wide range of markets.  Major markets include aerospace, appliance, automotive, electronics, industrial, medical device, and metal finishing. For additional information, click here.

Share

Print


Suggested Items

Real Time with...SMTAI 2020: MacDermid Alpha’s Flash Etching Electroplating Paper

09/23/2020 | Real Time with...SMTAI
I-Connect007’s Nolan Johnson catches up with Sean Fleuriel, a chemist for MacDermid Alpha Electronics Solutions, and Richard Bellemare, director of electrolytic metalization, to discuss the SMTAI technical paper presented by Fleuriel, titled, “Pit Resistant Acid Copper Electroplating Process for Flash Etching.” Fleuriel and Bellemare highlight the challenges, processes, and conclusions from the paper, as well as which PCB fabricators are most likely to benefit from this new process.

Just Ask Joe: The Occam Process

08/25/2020 | I-Connect007 Editorial Team
First, we asked you to send in your questions for Happy Holden. Now, it’s Joe Fjelstad’s turn! Inventor, columnist, instructor, and founder of Verdant Electronics, Joe has been involved with rigid PCBs and flexible circuits for decades, and he’s ready to share some of his knowledge with our readers. We hope you enjoy “Just Ask Joe.”

The iNEMI 2019 Board Assembly Roadmap

06/01/2020 | Pete Starkey, I-Connect007
iNEMI continues to publish chapters of its 2019 Roadmap and recently presented an overview of its Board Assembly Roadmap Chapter in a webinar prefaced by Grace O’Malley, vice president of global operations. The new chapter is just the latest addition to this global effort from 23 working groups contributing expert input from all aspects of the electronics industry.



Copyright © 2020 I-Connect007. All rights reserved.