MC Assembly Offers Students a Look Inside the World of Manufacturing


Reading time ( words)

MC Assembly, a mid-tier electronics manufacturing services (EMS) provider, recently wrapped up its latest round of innovative student outreach programs. Four graduating University of Central Florida (UCF) students completed their senior design internships while 10 students from the Florida Institute of Technology (FIT) took a tour of MC Assembly's manufacturing floor.

The MC Assembly internship program invites college seniors studying design, engineering and manufacturing to take a closer look at MC Assembly's manufacturing processes, allowing them to study and present their recommendations for efficiency and productivity improvements.

"We've been here a long time, we're not going to be here forever, so it's very important that there's another generation of people who are familiar with manufacturing…with the academics of it and the technology of it, but also the real-life experience of it if we’re going to remain strong as a manufacturing economy," said MC Assembly CEO George Moore.

The latest interns to complete the program were from the University of Central Florida. For three months, they worked in the facility, studying a new product line. For their final project, they presented their findings and recommendations for improvements on that product line to the MC Assembly senior staff including Moore, who gave honest and constructive feedback to the intern team.

"We were able to receive actual criticism from a CEO," said intern Jean Joseph. "He told us what he liked and didn't like from our presentation and that’s something that you just can't fabricate."

"Talking to someone who's been in the field longer then you is always something great that you can take back and help to improve," said intern Dusean Guerrier.

The interns said what they appreciated most was the hands-on experience they gained from studying and applying their classroom knowledge in a professional manufacturing facility.

"It was a great benefit to get to work on the manufacturing line and see how they make something from the planning department to actually building the actual project," said intern Natalie Hensley.

"It was great seeing how we could apply the knowledge from our lectures into a real-life application," said intern Manuel Molina.

The MC Assembly staff says the program is a win/win for both parties. The company gets fresh outside eyes to examine how they’re doing things and that sometimes leads to drive efficiency and improvement. At the same time, it gives the students a real-world experience to be able to practice what they’ve learned in the classroom.

"Every time I've sat through one of these we've learned an awful lot," Moore said. "The excitement and engagement level of the students has always been high and we want to do more of it."

Several students from the Florida Institute of Technology chapter of the American Society of Mechanical Engineers (ASME) recently took a tour of MC Assembly's Melbourne Florida plant. The three-hour tour included a question-and-answer session and was led by Dan Prina, MC Assembly's Project Manager of Lean Enterprise and Continuous Improvement. The primary goal was to give the students exposure to a real-world manufacturing facility. 

"It was exciting to see the machines and the systematic process they have set up," said Mario Acosta, a sophomore mechanical engineering major. "It was really impressive how exact and precise the machines are and how they were able to place such small components on the boards so quickly."

The tour was organized by MC Assembly's Michael Watts, who served as a chairman of the very same ASME Florida Tech Chapter in 1994-1995 when he was a mechanical engineering student.

Watts said these opportunities can make a difference in a student’s career decisions. Some of the students were focused on design engineering, but were curious to see the manufacturing side and learn how the design side connects with the manufacturing side.

"With mechanical engineers, many go into design work, but some go into manufacturing in one way or another," Watts said. "That's what happened with me when I was their age. After interning at Rockwell Collins, my passion turned from design to manufacturing, and I switched to industrial engineering. This was like being on the other side of the fence."

"Many of these students haven't had internships yet," Watts said. "For 80 percent of them, this was their first exposure to a working manufacturing floor, so to actually get that feeling of the differences between the working world and the college world is a good first step in understanding that it’s a different environment."

About MC Assembly

MC Assembly (http://www.mcati.com), based in Melbourne, Fla., with operations in Billerica, Mass., Palm Bay, Fla., and Zacatecas, Mexico, is a national leader in the contract manufacturing arena with annual revenues of approximately $200 million. It provides turnkey solutions to original equipment manufacturers and focuses on assembly of medium volume, medium mix printed circuit boards assemblies (PCBAs) and box builds. MC Assembly's capabilities include surface mount and pin-through-hole interconnection technologies, PCB and box build DFM, DFT, DFA engineering, in-circuit, functional and environmental testing, full box-build and direct order fulfillment.

Share

Print


Suggested Items

Blackfox Trains Veterans for Good Manufacturing Jobs

02/18/2020 | Real Time with...IPC
Blackfox Training Institute has been training manufacturing technologists for over 20 years. Based in Longmont, Colorado, Blackfox is now focused on helping veterans of our armed services transition into good jobs in the manufacturing sector. During IPC APEX EXPO 2020, Editor Nolan Johnson spoke with Blackfox CEO Al Dill about the company's veteran training programs, and how this effort is helping companies fill jobs that might otherwise go unfilled.

LPKF on Stencils and Depaneling

02/11/2020 | I-Connect007 Editorial Team
Stephan Schmidt and Mirela Orlowski of LPKF Laser & Electronics North America discuss laser technology in cutting stencils and depaneling circuit boards as a factor in shrinking component sizes and why few people in the industry realize how much of an impact the stencil can have on the manufacturing line.

Is Captive Making a Comeback?

12/20/2019 | Andy Shaughnessy, Design007 Magazine
Andy Shaughnessy recently spoke with Altium’s Steve Chalgren, senior VP of business strategy and planning. Steve shared his thoughts about why improved manufacturing and automated EMS equipment, such as robotics, might lead smaller OEMs to become captive shops like the old days. Is captive making a comeback?



Copyright © 2020 I-Connect007. All rights reserved.