SHENMAO America Sponsors SMTA Pan Pacific Microelectronics Symposium


Reading time ( words)

SHENMAO America, Inc. supports the SMTA by sponsoring the Luau & Reception at the Pan Pacific Microelectronics Symposium event held at the Sheraton Poipu Kauai Resort in Kauai, Hawaii.

SHENMAO Technology, Inc., the World’s Major Solder Materials Provider manufactures and distributes Semiconductor Packaging Solder Spheres, Package on Package Solder Paste, Bumping Solder Paste, Dipping Flux, SMT Solder Paste, Low and High Temperature Solder Paste, Laser Solder Paste, Solder Preform, Wave Solder Bar, Solder Wire and Flux, Liquid/Paste Flux, Plating Anodes and PV Ribbon.

SHENMAO America, Inc. blends Solder Paste in San Jose, CA with Tin smelted from Tin Ore concentrate creating ultrapure virgin powder made at its Facility in Taiwan for distribution in North America and worldwide locations.

For more information, please contact:

SHENMAO America, Inc.: www.shenmao.com; Tel: +1-408-943-1755; e-mail: usa@shenmao.com

Registration to Conference and Free Expo, click here.

Share

Print


Suggested Items

The Effectiveness of 75% IPA/25% DI Extraction Solution on No-clean Flux Residues

06/13/2019 | David Lober and Mike Bixenman, DBA, KYZEN; and Marietta Lemieux and Mark McMeen, STI
The continuous challenge in the electronics industry is to keep up with the demand for smaller, faster, and more reliable electronics. When it comes to cleaning, this rapid development of manufacturing and reliability challenges is juxtaposed with the slow pace of new test method development.

Reflow Your Solder and Your Data for Industry 4.0

06/11/2019 | Nolan Johnson, I-Connect007
I-Connect007 Managing Editor Nolan Johnson recently spoke with KIC President and Founder Phil Kazmierowicz and Manager of Applications and Sales MB “Marybeth” Allen as they each transitioned into new roles in the KIC leadership team. The conversation ultimately turned to the current dynamics in the industry, particularly Industry 4.0 and streamlining processes.

Laserssel Brings High-speed Soldering to New Application Areas

06/10/2019 | Barry Matties, I-Connect007
In this interview with I-Connect007, Denis Barbini, general manager of Laserssel, talks about the company's new laser-selective reflow solution aimed at reducing a typical reflow oven’s 10-minute cycle down to just 10 seconds as well as the overall benefits manufacturers could see from streamlining this process.



Copyright © 2019 I-Connect007. All rights reserved.