Henk Mathijssen Joins the Balver Zinn Group as Area Sales & Support Manager


Reading time ( words)

The Balver Zinn Group a leading manufacturer of solder materials, announces the appointment of Henk Mathijssen to the position of Area Sales & Support Manager. Henk Mathijssen brings more than 25 years of electronics and soldering experience to the team.  

Henk Mathijssen previously served the Q.P.I. Group as Application Engineer. With his excellent knowledge and experience on solder processes he developed with the Q.P.I. team a complaint handling system for optimum high-end customer support. During the 7 years at Q.P.I. Henk developed an excellent knowledge on rigid-, flex-rigid and flex PCB technology. 

Henk has a mechanical and electronic background and began his career at Vitronics Soltec where he served for 18 years in various functions in the field of sales, application, engineering and customer support. 

Henk is a certified IPC-A-600 and IPC-A-610 Specialist and has conducted numerous process training en demonstrations worldwide. In his new position he will be responsible for assisting Balver Zinn Group customer with their process development needs in all types of soldering areas.   

About the Balver Zinn Group

Headquartered in Germany, the Balver Zinn Group has facilities in Europe, the United States, and distributors in all major areas of the world. Balver Zinn – Cobar product range includes: solder bar, solder wire, solder flux, gel flux, cleaner, solder paste, adhesives and miscellaneous services and soldering products. For information about the company’s complete range of materials, visit www.balverzinn.com or www.cobar.com

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

IPC Standards Development: Business Challenges and an Inside View

10/28/2020 | Graham Naisbitt, Gen3 Systems
With increasing frequency, standardising the standards, such as ISO 9201, imposes certain rules that must be met to ensure “fair play” amongst the supply chain. There will be those familiar with hearing about “false positives/negatives” and “never trust the salesman,” so mitigating these is no easy task. However, there is the chance for each 5-30 Task Group to review industry requirements and set out the work program for the ensuing period. With that in mind, much of what follows is based on comments we learn about from our industry around the world, many of whom are not yet IPC members. Yes, this is a membership recruitment drive, unashamedly, as well as a search for volunteers willing to help create the standards of tomorrow.

How to Benefit From Robotic Soldering Processes

10/28/2020 | Pete Starkey, I-Connect007
Webinars are in vogue! But in Pete Starkey's experience, the master of the technical webinar with many years’ experience of delivering first-rate events is Bob Willis—electronics assembly specialist, soldering expert, and provider of training and consultancy in electronics manufacture. Here, Pete recaps Bob’s presentation on the upcoming robotic soldering experience.



Copyright © 2020 I-Connect007. All rights reserved.