Ellsworth Adhesives Europe Adds Dymax SpeedMask 9-7001 to Lineup


Reading time ( words)

Ellsworth Adhesives Europe is pleased to announce the addition of the new Dymax SpeedMask 9-7001 to its product range. This peelable maskant for PWB Connectors and Board Level is designed to create protection for connectors and board surfaces during solvent based or light-curable conformal coating applications in PWB assembly.

A new aspect of the enhanced SpeedMask range is the ability of the 9-7001 masking resin to facilitate curing within seconds. This is advantageous to the end user since it enables faster processing, greater output and lower shrinkage, whilst eliminating the need for tacks.

As the newest member of the Dymax electronic masking family, 9-7001 cures upon exposure to light and has been designed mindfully to ensure that when curing with Dymax light-curing spot lamps, focused-beam lamps or flood lamps the optimum speed and performance is delivered. By choosing Dymax lamps, the ideal balance of UV and visible light for the most rapid, deepest cures can be guaranteed. 

The SpeedMask® 9-7001 from Dymax has a number of additional benefits and features, making it the valued choice when electronically masking. Product highlights include: UV/Visible Light Curing, one-layer protection, compatibility with gold and copper connector pins, resistance to solvent based conformal coatings and primers, and non-slumping when dispensed. 

Highly effective when applied in a variety of applications including masking for solvent based conformal coating applications and masking for wave solder or reflow, Dymax 9-7001 is the perfect choice to replace traditional masking materials.

In addition, a unique component of Dymax 9-7001 is its ability to efficiently remove the silicone and halogen-free maskant, guaranteeing that no ionic contamination or silicone will be left behind as with other masking methods. It is also important to note that SpeedMask® resins contain no nonreactive solvents.

Dymax SpeedMask® light-curable temporary masking resins provide stable protection to component surfaces and cavities during surface finishing and preparation operations for metal, glass and some plastics. SpeedMask® resins are easily activated by syringe or through dipping, spray, or screen-printing. They are available in peelable, water-soluble, or burn-off grades enabling component surfaces to remain residuefree. Moreover, the 9-7001 offers the additional advantage of lower processing costs.

Ellsworth Adhesives Europe is an official distributor of Dymax UV Curing Products. To enquire about this material or any other products within the Ellsworth range please contact: infoeurope@ellsworth.com.    

Visit the Ellsworth Adhesives Europe website.   

About Ellsworth Adhesives Europe  

Ellsworth Adhesives Europe is the regional arm of American owned global entity, The Ellsworth Corporation. Across Europe, Ellsworth Adhesives has branches in France, Spain, Germany, Scandinavia and the United Kingdom, where our headquarters is located.

As a distributor of adhesives, specialty chemicals and adhesive dispensing equipment, the Ellsworth Adhesives product portfolio is huge and encompasses all of the industry’s leading brands including Loctite, Dow Corning, Dymax, Lord and many more.  

From epoxy adhesives and potting systems, to conformal coatings and surface preparation products, Ellsworth Adhesives has a material to suit every application. Alongside adhesive materials, Ellsworth also supplies a wide range of manual and automated adhesive dispensing equipment including tips, cartridges and static mixers, as well as dispensers and dispensing robots.  

Share

Print


Suggested Items

SMTAI 2019: Chris Bastecki on Low-temperature Solder Challenges and Products

10/14/2019 | Real Time with...SMTAI
Chris Bastecki, director of global PCB assembly at Indium Corporation, discussed challenges of low-temperature solder and the company's new product, Durafuse LT, which provides novel properties and reliability.

Real Time with... SMTAI 2019 Video Interviews

10/09/2019 | Real Time with...SMTAI
The SMTA International Conference and Exhibition 2019, which took place September 22–26, 2019, at the Donald E. Stephens Convention Center in Rosemont, Illinois, concluded successfully. For those of you who were not able to make it to the show, catch our video interviews with the movers and shakers of the electronics industry. We've updated our video presentation for a better experience for our users, so check it out!

SMTAI 2019: Happy Holden’s On-the-Scene Report

10/03/2019 | Happy Holden, I-Connect007
Last week concluded the 2019 SMTAI conference in Rosemont, Illinois. Overall, I think the show was successful and covered all aspects of SMT processes.



Copyright © 2019 I-Connect007. All rights reserved.