CyberOptics Demos Extended Sensing Capability in Airborne Particle Sensor at SEMICON Korea


Reading time ( words)

CyberOptics Corporation is demonstrating its next-generation Airborne Particle Sensor technology (APS2) with an extended particle size range at SEMICON Korea, which is being held February 8-10 at the COEX in Seoul. CyberOptics is at Booth 2220.

CyberOptics' APS2 portfolio speeds equipment set-up and long-term yields in semiconductor fabs by wirelessly monitoring airborne particles in real-time. The next-generation APS2 provides even greater versatility, with the industry-leading accuracy and sensitivity valued by semiconductor fabs and equipment OEMs worldwide.

Both the WaferSense and ReticleSense Airborne Particle Sensors (APS2, APSR and APSRQ) can measure small and large particles. The new large particle detecting and measurement functionality covers a range of sizes with four bins for particles larger than 2, 5, 10 and 30 microns.

"Our APS2 sensors are widely used to detect, identify and monitor airborne particles in the leading semiconductor fabs around the globe," said Dr. Subodh Kulkarni, President and CEO, CyberOptics. "Extending the measurement capability range in the same device provides an efficient solution for our customers that improves yields."

At SEMICON Korea, CyberOptics will also demonstrate its WaferSense and ReticleSense Auto Multi Sensors (AMS/AMSR) that measure leveling, vibration, and relative humidity (RH) in an all-in-one wireless real-time device. The thin and light form factor enables the AMS to travel through virtually any tool and the AMSR can capture multiple measurements in all locations of the reticle environment. The all-in-one devices are yet another way to increase yield and reduce downtime in semiconductor environments.

About the WaferSense and ReticleSense Line

The WaferSense measurement portfolio including the Auto Leveling System (ALS), the Auto Gapping System (AGS), the Auto Vibration System (AVS), the Auto Teaching System (ATS), the Airborne Particle Sensor (APS), the advanced Airborne Particle Sensor (APS2) and the new Auto Multi Sensor (AMS) are available in various wafer shaped form factors depending on the device, including 150mm, 200mm and 300mm wafer sizes. The ReticleSense measurement portfolio including the Airborne Particle Sensor (APSR & APSRQ) and next-generation APS2, the Auto Leveling System (ALSR) and the Auto Multi Sensor (AMSR) are available in a reticle shaped form factor. 

For more information about the entire line of CyberOptics solutions please click here.  

About CyberOptics

CyberOptics Corporation is a leading global developer and manufacturer of high precision sensing technology solutions. CyberOptics sensors are being used in general purpose metrology and 3D scanning, surface mount technology (SMT) and semiconductor markets to significantly improve yields and productivity. By leveraging its leading edge technologies, the company has strategically established itself as a global leader in high precision 3D sensors, allowing CyberOptics to further increase its penetration of its key vertical segments. Headquartered in Minneapolis, Minnesota, CyberOptics conducts worldwide operations through its facilities in North America, Asia and Europe.

Share

Print


Suggested Items

Eileen Hibbler and Jason Emes on Improving the West Penn SMTA Chapter

04/22/2019 | Patty Goldman, I-Connect007
At the recent West Penn SMTA Expo, Eileen Hibbler, a chapter support specialist at SMTA, and Jason Emes, the current president of the West Penn SMTA Chapter, discuss ways to improve meeting attendance and develop a new slate of chapter officers.

Jennie Hwang: Get Ready for Disruptive Technologies

03/27/2019 | Nolan Johnson, I-Connect007
At IPC APEX EXPO 2019, Dr. Jennie S. Hwang, a columnist, author, and all-around an expert in PCB assembly, discusses some of the changes she has seen since joining the industry, and disruptive technologies that technologists we are going to have to face in the near future. Are you ready for the future?

Improving the Efficiency of Your PCBA Production

02/15/2019 | Neil Sharp, JJS Manufacturing
Ensuring you're hitting your build times is always a major priority in surface mount production. The challenge for many OEMs, however, is that the processes involved with PCBA can be numerous and complex. And the smallest of details can make the biggest of differences.



Copyright © 2019 I-Connect007. All rights reserved.