Indium's Andreas Karch to Present at EPP InnovationsFORUM


Reading time ( words)

Indium Corporation's Andreas Karch, Regional Technical Manager for Germany, Austria and Switzerland, will present at the EPP InnovationsFORUM on March 9 in Böblingen, Germany.

Karch will present "Miniaturization: Solder Paste Attributes for Maximizing the SMT Print and Reflow Manufacturing Process Window," which details the development of a flux technology platform to achieve print consistency by maximizing paste transfer and minimizing deviation for small apertures (sub-300 microns diameter, area ratios of 0.5-0.6); eliminate HIP with an enhanced oxidation barrier approach, as opposed to just making a flux more active; achieve complete solder coalescence and prevent clumpy solder joints; and achieve very low-voiding.

Karch provides support, including sharing process knowledge and making technical recommendations for the use of Indium Corporation’s materials, including solder paste, solder preforms, fluxes, and thermal management materials. Karch has more than 20 years of automotive industry experience, including the advanced development of customized electronics. He is an ECQA-certified integrated design engineer and has a Six Sigma Yellow Belt. The Austrian Patent Office also selected him as one of the 2014 recipients of the Top 10 Inventum Awards for an automotive LED assembly. Karch maintains a thorough understanding of process technologies and project management skills.

InnovationsFORUM is an event for electronics manufacturers to learn the most advanced technologies, materials, and processes.

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, Indium has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, click here.

Share

Print


Suggested Items

PCB Design Training: More Critical Than Ever

09/05/2019 | Andy Shaughnessy, Design007 Magazine
I interviewed Gary Ferrari of FTG at the IPC High-Reliability Forum and Microvia Summit in Baltimore. Gary is a co-founder of the IPC Designers Council and a longtime advocate for PCB design and PCB designers. We discussed the crucial role that PCB designers play in the entire electronics development process, and how IPC and the Designers Council are helping to educate and inform the next generation of designers.

Conformal Coating Selection: Conventional vs. Two-part

08/14/2019 | Phil Kinner, Electrolube
As assemblies become more densely populated, and housing/casing designs become more permeable to save weight, the use of conformal coatings is essential to protect the assembly from its operating environment and ensure acceptable reliability for the application intended, especially when operating in hostile environments.

Low-Temperature SMT Solder Evaluation

07/05/2019 | H. Osgood, D. Geiger, R. Pennings, C. Biederman, J. Jiang, and J. Bernal, Flex Inc.
Until recently, the use of Sn/Bi-based SMT solder materials has been investigated with negative consequences for high strain rate (drop-shock) applications; thus, these alloys have been avoided. Recent advances in alloy 'doping' have opened the door to revisit Sn/Bi alloys as a possible alternative to SAC-305 for many applications.



Copyright © 2019 I-Connect007. All rights reserved.