Robnor ResinLab Launches New Epoxy Resin PX901C


Reading time ( words)

Robnor ResinLab has today announced the launch of PX901C, a brand new epoxy resin with excellent heat resistance and dimensional stability.

Available in beige or black, PX901C offers end users high electrical insulation, low shrinkage and excellent chemical resistance.  

The high abrasion resistance of PX901C ensures PX901C will be hard wearing and should retain its surface finish for longer.

The Product Development Team at Robnor ResinLab predict that users will be especially impressed with the process-ability of PX901C. With a viscosity of just 3400 – 8000 (when mixed) this material is very easy to work with.

Furthermore, PX901C from Robnor ResinLab is thermally conductive and has an exceptionally good operating temperature of up to 220 °C.

Typical applications for PX901C include castings, circuit board components and electrical insulation, however, we can reveal that this material particularly caught the interest of manufacturers in the printing industry, who trialled it in the Research & Development stage.

Robnor ResinLab PX901C is WEEE, RoHS and REACH compliant and can be purchased in bulk, as a twin pack or as a kit.

Share

Print


Suggested Items

Comparing Soldering Results of ENIG and EPIG Post-steam Exposure

09/11/2019 | Jon Bengston and Richard DePoto, Uyemura International USA
Electroless nickel immersion gold (ENIG) is now a well-regarded finish used to enhance and preserve the solderability of copper circuits. Electroless palladium immersion gold (EPIG), meanwhile, is a new surface finish also for enhancing and preserving solderability—but with the advantage of eliminating electroless nickel from the deposit layer. This feature has become increasingly important with the increasing use of high-frequency PCB designs whereby nickel’s magnetic properties are detrimental.

Cavity Board SMT Assembly Challenges (Part 1)

06/26/2019 | By Dudi Amir and Brett Grossman, Intel Corp.
The concept behind Component-in-Cavity (CiC) is straightforward. If the tallest component(s) on the motherboard can be placed into a recession created in the motherboard, their thickness relative to the components on the surface of the PCB will thus effectively be reduced. While this concept may be straightforward, its implementation is not. That implementation is the focus of this paper. Read on.

3D Optical Inspection Provides ‘Eyes’ for Process Improvements in Industry 4.0

06/21/2019 | Jenny Yuh, Koh Young Technology, and Brent Fischthal, Koh Young America
Automated 3D solder paste inspection (SPI) and 3D automated optical inspection (AOI) systems have become an integral part of the printed circuit board assembly (PCBA) process because they help ensure high-quality production. As today’s board complexity is increasing, inspection technology has become even more critical.



Copyright © 2019 I-Connect007. All rights reserved.