Dymax's Dr. Nebioglu Presented Research at IPC APEX Expo


Reading time ( words)

Dymax Corporation is proud of the participation of its Senior R&D Manager of the Adhesives team, Dr. Aysegul Kascatan Nebioglu at the IPC/ APEX Expo 2017 that took place on February 14 to 17 in San Diego, California. Dr. Nebioglu’s technical presentation, “UV Broad Spectrum & LED Curable 100% Solids Very Low Viscosity Conformal Coating”, was held on Thursday, February 16, at 10:30 a.m., as part of the Technical Conference, Conformal Coatings.  

Dr. Neblioglu reviewed development of 20 cP viscosity 100% solids UV/ LED-curable conformal coating for very thin conformal coating applications. Her presentation expanded on this knowledge by discussing performance in reliability tests such as heat and humidity resistance (500 hours at 85oC / 85 % relative humidity), and corrosion resistance (flowers of sulfur resistance and salt spray resistance).

A free copy of the white paper can be obtained here

About Dymax Corporation 

Dymax Corporation develops innovative oligomer, adhesive, coating, dispensing, and light-curing systems for applications in a wide range of markets.  The company’s products are perfectly matched to work seamlessly with each other, providing design engineers with tools to dramatically improve manufacturing efficiency and reduce costs.  Major markets include aerospace, appliance, automotive, cosmetics, electronics, industrial, medical device, metal finishing, and UV-curable inks & coatings.

Share

Print


Suggested Items

Stencils: Not As Simple As They Seem

02/26/2020 | I-Connect007 Editorial Team
Stephanie Hardin of Integrated Ideas and Technologies Inc. discusses her role in the supply chain as a stencil manufacturer, improvements she sees from micromachined step stencils, and why she believes trying to have standardized stencil layouts is wishful thinking due to the many fluctuating variables.

Blackfox Trains Veterans for Good Manufacturing Jobs

12/31/1969 | Real Time with...IPC
Blackfox Training Institute has been training manufacturing technologists for over 20 years. Based in Longmont, Colorado, Blackfox is now focused on helping veterans of our armed services transition into good jobs in the manufacturing sector. During IPC APEX EXPO 2020, Editor Nolan Johnson spoke with Blackfox CEO Al Dill about the company's veteran training programs, and how this effort is helping companies fill jobs that might otherwise go unfilled.

UV-curable Materials and Conformal Coatings

12/23/2019 | Pete Starkey, I-Connect007
Pete Starkey and Phil Kinner, global business and technical director, coatings division, Electrolube, discuss the characteristics and benefits of the company’s new UV-cured conformal coatings. Phil also describes the development of coatings for critical avionics applications and Electrolube’s collaboration with the U.K. National Physical Laboratory to establish a new condensation test.



Copyright © 2020 I-Connect007. All rights reserved.