AIM to Highlight REL Alloys at SMTA Dallas Expo & Tech Forum


Reading time ( words)

AIM Solder is pleased to announce their participation at the SMTA Dallas Expo & Tech Forum, scheduled to take place March 7th, 2017 at the Plano Centre in Plano, Texas. AIM will highlight their revolutionary REL61 and REL22 lead-free solder alloys, along with their full line of solder assembly materials.

Developed by AIM, the REL61 and REL22 lead-free solder alloys have been specifically engineered as exceptionally durable alloys for extreme service environments. REL61 and REL22 provide superior thermal cycling performance and lower voids versus other lead-free alloys. They have shown to reduce tin whisker formation and improved strength versus SAC alloys making them ideal for high reliability electronics applications. 

Additionally, AIM will highlight its full line of advanced solder materials, including its solder pastes, liquid fluxes, tin/lead and lead-free alloys. To discover all of AIM’s products and services, visit the company at the SMTA Dallas Expo & Tech Forum for more information. 

About AIM

Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products such as solder paste, liquid flux, cored wire, bar solder, epoxies, lead-free and halogen-free solder products, preforms, and specialty alloys such as indium and gold for a broad range of industries. A recipient of many prestigious SMT industry awards, AIM is strongly committed to innovative research and development of product and process improvement as well as providing customers with superior technical support, service and training. For more information about AIM, click here

Share

Print


Suggested Items

The Effectiveness of 75% IPA/25% DI Extraction Solution on No-clean Flux Residues

06/13/2019 | David Lober and Mike Bixenman, DBA, KYZEN; and Marietta Lemieux and Mark McMeen, STI
The continuous challenge in the electronics industry is to keep up with the demand for smaller, faster, and more reliable electronics. When it comes to cleaning, this rapid development of manufacturing and reliability challenges is juxtaposed with the slow pace of new test method development.

Reflow Your Solder and Your Data for Industry 4.0

06/11/2019 | Nolan Johnson, I-Connect007
I-Connect007 Managing Editor Nolan Johnson recently spoke with KIC President and Founder Phil Kazmierowicz and Manager of Applications and Sales MB “Marybeth” Allen as they each transitioned into new roles in the KIC leadership team. The conversation ultimately turned to the current dynamics in the industry, particularly Industry 4.0 and streamlining processes.

Laserssel Brings High-speed Soldering to New Application Areas

06/10/2019 | Barry Matties, I-Connect007
In this interview with I-Connect007, Denis Barbini, general manager of Laserssel, talks about the company's new laser-selective reflow solution aimed at reducing a typical reflow oven’s 10-minute cycle down to just 10 seconds as well as the overall benefits manufacturers could see from streamlining this process.



Copyright © 2019 I-Connect007. All rights reserved.