STI Electronics Goes to SMTA Houston Expo


Reading time ( words)

STI Electronics Inc. will exhibit at the SMTA Houston Expo & Tech Forum, which is scheduled to take place March 9, 2017 at the Stafford Center in Houston, Texas. Company representatives will discuss STI's Training Resources and Engineering Services divisions.

STI's Training Services division develops customized training courses to fit specific training needs. Typically, STI builds these classes around company-specific standards and specifications. STI is an IPC authorized training center for J-STD-001, IPC-A-610, IPC/WHMA-A-620, IPC-A-600 and IPC-7711/7721, and provides both Certified IPC Application Specialist (CIS) and Certified IPC Trainer (CIT) courses.

Other courses include basic soldering, wave soldering, ESD training, BGA rework and many more. It also provides operator/inspector training for through-hole and SMT soldering, conformal coating, and training to the requirements of NASA-STD-8739.1 and NASA-STD-8739.4 for Marshall Space Flight Center and its support contractors. In addition to its standardized training program support materials, STI Electronics’ Training Materials division provides unique or custom training materials including Fine Pitch Lead Free Solder Training Kits. STI is an approved distributor for IPC training materials and videos.

STI's Engineering Services division provides engineering support and specialized contract manufacturing services for the electronics manufacturing industry. From product design and manufacturability analysis to pre-production prototype and development, STI's Prototype and Development Lab is a full-service design review and preproduction facility. STI’s Microelectronics Lab was established to meet the rising need for advanced systems development and assembly.

The Microelectronics Lab specializes in state-of-the-art engineering design including current technologies such as Chip-On-Board (COB) and Multichip Module (MCM) as well as emerging technologies such as Imbedded Component/Die Technology (IC/DT).

For more information about STI Electronics, Inc., visit www.stielectronicsinc.com.

About STI Electronics, Inc.

Since 1982, STI Electronics, Inc. (STI) has been the premier full service organization for training, consulting, laboratory analysis, prototyping, and small-to-medium volume PCB assembly in the electronics industry. STI also produces a complete line of solder training kits and training support products. For more information, visit www.stielectronicsinc.com.

Share

Print


Suggested Items

Comparing Soldering Results of ENIG and EPIG Post-steam Exposure

09/11/2019 | Jon Bengston and Richard DePoto, Uyemura International USA
Electroless nickel immersion gold (ENIG) is now a well-regarded finish used to enhance and preserve the solderability of copper circuits. Electroless palladium immersion gold (EPIG), meanwhile, is a new surface finish also for enhancing and preserving solderability—but with the advantage of eliminating electroless nickel from the deposit layer. This feature has become increasingly important with the increasing use of high-frequency PCB designs whereby nickel’s magnetic properties are detrimental.

Solder Mask Evolves into a Truly Additive Process

09/09/2019 | John Fix, Taiyo America Inc.
The 5G era is creating quite a bit of work for many PCB engineers as the materials required to keep up with the speed, frequency, and latency requirements need to be defined and qualified. Solder mask, for example, now becomes a truly additive process. Read on to find out how and why.

Selecting the Proper Flex Coverlayer Material

09/06/2019 | Dave Lackey, American Standard Circuits
Coverlayers are polymer materials used to cover and protect the copper traces of the flex circuit product. There are a number of different options available for protecting the circuits, and they serve different design requirements in terms of cost, performance, and flexural endurance optimization. When specifying the choice, it is critical to call out not just the type of coverlayer material but also the thickness requirement. This can be very important in certain types of constructions, especially when a flex circuit will experience dynamic flexing during use.



Copyright © 2019 I-Connect007. All rights reserved.