Nordson ASYMTEK to Present at IMAPS Device Packaging Conference


Reading time ( words)

Nordson ASYMTEK, a Nordson company, a global leader in dispensing, jetting, and coating equipment and technologies, will present a technical paper and poster session at the IMAPS Device Packaging Conference being held at the WeKoPa Resort & Casino in Scottsdale/Fountain Hills, Arizona, March 7-9, 2017.

On March 8, Akira Morita, business development manager, Nordson ASYMTEK, will present a poster titled, EMI Shielding: Improving Sidewall Coverage with Tilt Spray Coating, authored by Michael Szuch, senior applications engineer, Nordson ASYMTEK. Bluetooth, Wi-Fi, 3G, LTE, wearables, and the internet-of-things are all examples of recent technologies that rely on different radio frequencies. As manufacturers continue to design thinner, smaller devices, it has become increasingly important to develop reliable EMI shielding solutions at the individual component level through the application of thin conductive coating. To address this challenge, Nordson ASYMTEK partnered with a number of fluid formulators to explore the use of a tilted spray applicator to improve directional spray accuracy and sidewall coverage. Join us at the session to see the results and to learn how tilt spray coating can improve EMI shielding.

On March 9, Nordson ASYMTEK applications engineer, Hanzhuang Liang, will present High-throughput Underfill Dispense in Chip-on-Wafer Packaging. The continuous demand for cost reduction and component miniaturization in device packaging has encouraged the use of wafer-level packaging, such as the chip-on-wafer process, which utilizes underfill dispensing. The trend towards smaller, more densely assembled components has led to exponential challenges in underfill dispensing. Attend the technical session to learn about the high-precision, high-throughput underfill dispensing process developed to conquer these challenges.

About Nordson ASYMTEK

Nordson ASYMTEK, a world leader in precision fluid dispensing, conformal coating, and jetting technologies, designs and manufactures dispensing and coating systems, supported by an award-winning global applications and service network for over 30 years.

For information contact Nordson ASYMTEK at info@nordsonasymtek.com, call +1 760-431-1919, or visit our website www.nordsonasymtek.com.   

About Nordson Corporation

Nordson Corporation delivers precision technology solutions that help customers succeed worldwide. Precision dispensing of adhesives, coatings, sealants, biomaterials, and other fluids, plastic extrusion and injection molding, electronics testing and inspecting, and surface preparation are supported by applications expertise and direct global support. Nordson serves consumer non-durable, durable and high-technology markets, specializing in packaging, nonwovens, electronics, medical, energy, transportation, construction, and product assembly. Founded in 1954, headquartered in Westlake, Ohio, USA, Nordson has operations and support offices in 30+ countries. Connect with Nordson at www.nordson.com

Share

Print


Suggested Items

Laserssel Brings High-speed Soldering to New Application Areas

06/10/2019 | Barry Matties, I-Connect007
In this interview with I-Connect007, Denis Barbini, general manager of Laserssel, talks about the company's new laser-selective reflow solution aimed at reducing a typical reflow oven’s 10-minute cycle down to just 10 seconds as well as the overall benefits manufacturers could see from streamlining this process.

Video from productronica 2017: Nordson ASYMTEK Highlights Bulk Dispensing Technology

11/16/2017 | I-Connect007
At this week’s productronica, Nordson ASYMTEK highlights its the new Helios SD960 bulk and two-component dispensing system. Almar Thewissen, program manager for Industrial Applications, EMEA, at Nordson, discusses its applications with I-Connect007 Technical Editor Pete Starkey.

RTW SMTAI: AIM's Dr. Mehran Maalekian Speaks on New Alloys for Harsh Environments

10/03/2017 | Real Time with...SMTAI
Dr. Mehran Maalekian, R&D Manager at AIM Solder, speaks with I-Connect007 Managing Editor Andy Shaughnessy about new alloys that are targeted for high-temperature and demanding applications, particularly in harsh environments, where standard lead-free alloy such as SAC will not perform as well.



Copyright © 2019 I-Connect007. All rights reserved.