Indium Experts to Present at SMTA’s South East Asia Technical Conference 2017


Reading time ( words)

Indium Corporation’s Dr. Ning-Cheng Lee, Vice President of Technology, and other company experts will present at SMTA’s South East Asia Technical Conference on Electronics Assembly Technologies 2017, March 28-30, in Penang, Malaysia.

Dr. Lee will instruct a two-part seminar on Choosing Solders for the New Era on Tuesday, March 28. Part one will take place from 8:30 a.m. to noon and focus on lead-free solder alloys, and part two will run from 1:30-5 p.m. and discuss low-temperature solders.

Jonas Sjoberg, Technical Manager, will chair the Advanced Packaging session on Thursday, March 30.

Technical presentations by Indium Corporation experts include:

  • Voiding Control at LED Die-Attach Preform Soldering by Dr. Lee
  • Assessment of Solder Paste Technology Limitation for Printing Applications by Dr. Lee
  • Process Optimization for Cold Joint and Tombstone Improvement in SiP Package by Jason Chou, Area Technical Manager – Taiwan
  • System-in-Package (SiP) Assembly vs. Solder Paste Attributes by Kenneth Thum, Senior Technical Support Engineer

For more information on the technical sessions offered at SMTA’s South East Asia Technical Conference, visit www.smta.org/southeast-asia.

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, Indium has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, visit www.indium.com or email jhuang@indium.com

Share

Print


Suggested Items

3D Optical Inspection Provides ‘Eyes’ for Process Improvements in Industry 4.0

06/21/2019 | Jenny Yuh, Koh Young Technology, and Brent Fischthal, Koh Young America
Automated 3D solder paste inspection (SPI) and 3D automated optical inspection (AOI) systems have become an integral part of the printed circuit board assembly (PCBA) process because they help ensure high-quality production. As today’s board complexity is increasing, inspection technology has become even more critical.

Goepel electronic Solutions, Webinar Series, and Trends

06/19/2019 | Barry Matties, I-Connect007
Barry Matties catches up with Matthias Müller to chat about the wide range of test and inspection solutions currently being offered by Goepel electronic as well as the informative webinar series produced by the company to help further educate their customer base and promote technical discussion on a number of topics.

The Effectiveness of 75% IPA/25% DI Extraction Solution on No-clean Flux Residues

06/13/2019 | David Lober and Mike Bixenman, DBA, KYZEN; and Marietta Lemieux and Mark McMeen, STI
The continuous challenge in the electronics industry is to keep up with the demand for smaller, faster, and more reliable electronics. When it comes to cleaning, this rapid development of manufacturing and reliability challenges is juxtaposed with the slow pace of new test method development.



Copyright © 2019 I-Connect007. All rights reserved.