AIM to Highlight REL61 at SMTA Intermountain (Boise) Expo & Tech Forum


Reading time ( words)

AIM Solder is pleased to announce their participation at the SMTA Intermountain (Boise) Expo & Tech Forum, scheduled to take place March 29th, 2017 at Boise State University in Boise, Idaho. AIM will highlight their revolutionary REL61 lead-free solder alloy, along with their full line of solder assembly materials. 

REL61 addresses the most challenging issues with today’s common lead-free alloys, specifically voiding, cost, durability and tin whiskers.  Combined with AIM M8 Solder Paste, REL61 has reduced voiding on BTC packages by over 45%, increasing both thermal performance and solder joint integrity. REL61 offers a low cost alternative to SAC alloys, with reliability and performance characteristics superior to SAC305 and other low/no-silver solder alloys. Extensive testing indicates that REL61 can reduce tin whisker formation as well as outperform SAC alloys in thermal shock, vibration and drop shock resistance.  

AIM will highlight its full line of advanced solder materials, including its solder paste, liquid flux and solder alloys, including its newly developed REL22 solder alloy for extremely harsh environments. To discover all of AIM’s products and services, visit the company at the SMTA Intermountain (Boise) Expo & Tech Forum for more information. 

About AIM

Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products such as solder paste, liquid flux, cored wire, bar solder, epoxies, lead-free and halogen-free solder products, preforms, and specialty alloys such as indium and gold for a broad range of industries. A recipient of many prestigious SMT industry awards, AIM is strongly committed to innovative research and development of product and process improvement as well as providing customers with superior technical support, service and training. For more information about AIM, visit www.aimsolder.com

Share


Suggested Items

Reliability of ENEPIG by Sequential Thermal Cycling and Aging

11/06/2017 | Reza Ghaffarian, Jet Propulsion Laboratory, California Institute of Technology
Electroless nickel/electroless palladium/immersion gold (ENEPIG) surface finish for PCBs has now become a key surface finish that is used for both tin-lead and lead-free solder assemblies. This article presents the reliability of LGA component packages with 1156 pads assembled with tin-lead solder onto PCBs with an ENEPIG finish and then subjected to thermal cycling and then isothermal aging.

The Root Causes & Solutions for Warped PC Boards

09/27/2017 | Duane Benson, Screaming Circuits
There are two primary types of causes of board warping: process related at the fab or assembly shop, and layout related issues. If it's warped before assembly, it's between fab and layout. If it's flat before assembly and warped after, it's most likely between layout and assembly. That said, sometimes a fab problem won't show up until a pass through the reflow oven at your assembly partner.

X-Ray Inspection of Lead and Lead-Free Solder Joints

07/31/2017 | Glen Thomas, Ph.D., and Bill Cardoso, Ph.D., Creative Electron Inc.
As aerospace companies consider the shift to lead-free solder alloys and glues, concerns have been raised about whether their current X-ray inspection and quality-control procedures will still be valid. With lead solder, joints are easily interpreted by the operator or the system imaging software because lead provides excellent image contrasts due to relatively high X-ray absorption compared to that of PCB and component materials. Will this hold true as they shift to lead-free solder compounds?



Copyright © 2017 I-Connect007. All rights reserved.