Contamination, Cleaning and Coating Conference Program Finalized


Reading time ( words)

SMTA and SMART Group have finalized the program for the Contamination, Cleaning and Coating Conference. The event will be held May 22-24, 2017 at the Radisson Blu Airport Hotel in Amsterdam, Netherlands.

A half-day workshop on Cleaning Printed Circuit Assemblies, Design & Process Control will open the conference on Monday, May 22, 2017. Bob Willis will instruct the course along with Helmut Schweigart, Ph.D., ZESTRON, and Mike Bixenman, DBA, KYZEN Corporation.

This global conference is a strong two and a half day technical event focused on the most important and timely issues on contamination, cleaning and conformal coating in the manufacture of electronics. Conference sessions will include Residues Trapped Under Component Terminations, How Problematic are Contaminants Left on Printed Circuit Assemblies, Process Control and Cleaning Material Innovations and Conformal Coating Materials and Processes.

On Tuesday, May 23, Prabjit Singh, Ph.D., IBM Corporation, will provide his keynote presentation on the “Occurrence and Prevention of Electronic Hardware Failures due to Gaseous and Particulate Contamination in Data Centers.”

Rudiger Knofe, Siemens AG, will keynote Wednesday, May 24 with his presentation titled “Cleaning of Electronics: Analysing Cleaning Results and Potential Damage Risks When Cleaning Process is Not Optimal.”

The Contamination, Cleaning and Coating Conference is the first-ever conference co-organized by SMTA and SMART Group.

Registration is now open for the conference. For more information, click here.

About SMTA

The SMTA membership is an international network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies, including microsystems, emerging technologies, and related business operations. A global association  Working at a local level.

About SMART Group

The SMART Group Aims to Promote the Advancement of the Electronics Manufacturing Industry through the Education, Training and Notification of its Members in Surface Mount and Related Assembly Technologies, and by the Promotion of a Community of Electronics Manufacturing Professionals.

Share


Suggested Items

Why You Want Your EMS Partner to Be Annoying and Boring

01/04/2018 | Neil Sharp, JJS Manufacturing
Outsourcing part or all of your manufacturing to an electronics manufacturing service (EMS) provider can be daunting. Handing over some of the control of your business can be a scary prospect.

Equipment Matters in Solder Paste Printing

12/06/2017 | Stephen Las Marias, I-Connect007
The solder paste printing process has always been considered a major contributor to yield loss. According to many studies, solder paste printing accounts for up to 70% of all PCB assembly defects. For the December issue of SMT Magazine, we interviewed experts in the solder paste printing process to learn more about the key issues leading to this huge percentage of defects, and the technology developments that are addressing these challenges and improving yields in the process.

Video from productronica 2017: Koh Young Focuses on Total Inspection Solution

11/20/2017 | I-Connect007
At the show floor of productronica 2017, I-Connect007 Technical Editor Pete Starkey speaks with Managing Director Harald Eppinger of Koh Young Europe GmbH about the principles of Koh Young’s total 3D inspection solution for SMT process optimization and yield improvement.



Copyright © 2018 I-Connect007. All rights reserved.