AIM to Highlight REL61 at the SMTA Cd Juarez Technical Forum & Expo


Reading time ( words)

AIM Solder will highlight their revolutionary REL61 lead-free solder alloy, along with their full line of solder assembly materials, at the SMTA Cd Juarez Technical Forum & Expo, scheduled to take place on April 6, 2017 at the Hotel Real Inn in Cd Juarez, Chihuahua, Mexico.

REL61 addresses the most challenging issues with today’s common lead-free alloys, specifically voiding, cost, durability and tin whiskers. Combined with AIM M8 Solder Paste, REL61 has reduced voiding on BTC packages by over 45%, increasing both thermal performance and solder joint integrity. REL61 offers a low cost alternative to SAC alloys, with reliability and performance characteristics superior to SAC305 and low/no-silver solder alloys. Extensive testing indicates that REL61 can reduce tin whisker formation as well as outperform SAC alloys in thermal shock, vibration and drop shock resistance.

AIM will also highlight its full line of advanced solder materials, including solder paste, liquid flux and solder alloys, including its newly developed REL22 solder alloy for extremely harsh environments. To discover all of AIM’s products and services, visit the company at the SMTA Cd Juarez Technical Forum & Expo for more information. 

About AIM

Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products such as solder paste, liquid flux, cored wire, bar solder, epoxies, lead-free and halogen-free solder products, preforms, and specialty alloys such as indium and gold for a broad range of industries. A recipient of many prestigious SMT industry awards, AIM is strongly committed to innovative research and development of product and process improvement as well as providing customers with superior technical support, service and training. For more information about AIM, visit www.aimsolder.com

Share

Print


Suggested Items

The Effectiveness of 75% IPA/25% DI Extraction Solution on No-clean Flux Residues

06/13/2019 | David Lober and Mike Bixenman, DBA, KYZEN; and Marietta Lemieux and Mark McMeen, STI
The continuous challenge in the electronics industry is to keep up with the demand for smaller, faster, and more reliable electronics. When it comes to cleaning, this rapid development of manufacturing and reliability challenges is juxtaposed with the slow pace of new test method development.

Reflow Your Solder and Your Data for Industry 4.0

06/11/2019 | Nolan Johnson, I-Connect007
I-Connect007 Managing Editor Nolan Johnson recently spoke with KIC President and Founder Phil Kazmierowicz and Manager of Applications and Sales MB “Marybeth” Allen as they each transitioned into new roles in the KIC leadership team. The conversation ultimately turned to the current dynamics in the industry, particularly Industry 4.0 and streamlining processes.

Laserssel Brings High-speed Soldering to New Application Areas

06/10/2019 | Barry Matties, I-Connect007
In this interview with I-Connect007, Denis Barbini, general manager of Laserssel, talks about the company's new laser-selective reflow solution aimed at reducing a typical reflow oven’s 10-minute cycle down to just 10 seconds as well as the overall benefits manufacturers could see from streamlining this process.



Copyright © 2019 I-Connect007. All rights reserved.