Indium Expert to Present at PCIM and SMT Hybrid Packaging 2017


Reading time ( words)

Indium Corporation's Andreas Karch, Regional Technical Manager for Germany, Austria and Switzerland, will present at PCIM Europe 2017 and SMT Hybrid Packaging on May 16 in Nuremberg, Germany.

Karch will present Performance of Current Flux Systems in Solder Pastes to Increase the Electrical Reliability of Assemblies. He will discuss solder paste flux systems, solder paste performance, and the addition of solder volume for pin-in-paste using Solder Fortification preforms.

Karch provides support, including sharing process knowledge and making technical recommendations for the use of Indium Corporation’s materials, including solder paste, solder preforms, fluxes, and thermal management materials. Karch has more than 20 years of automotive industry experience, including the advanced development of customized electronics. He is an ECQA-certified integrated design engineer and has a Six Sigma Yellow Belt. The Austrian Patent Office also selected him as one of the 2014 recipients of the Top 10 Inventum Awards for an automotive LED assembly. Karch maintains a thorough understanding of process technologies and project management skills.

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, Indium has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, visit www.indium.com or email abrown@indium.com.   

Share


Suggested Items

Solder Printing Process Inputs Impacting Distribution of Paste Volume

12/14/2017 | Marco Lajoie and Alain Breton, C-MAC Microelectronics
The volume of solder deposition, like any process, has variations that may be characterized by a statistical distribution curve, whether normal or non-normal. As complexity, density, cost and reliability requirements increase, there may be value in narrowing the distribution curve. It is common sense that less variation serves the interest of quality of the more complex and dense circuit boards.

Improving Solder Paste Printing

12/12/2017 | Stephen Las Marias, I-Connect007
Of the three elements involved in the solder paste printing process—stencil, solder paste, and printer—the stencil is considered one of the major factors affecting the transfer efficiency, accuracy, and consistency, of solder pastes into the pads, especially with the continuing trend towards miniaturization.

Equipment Matters in Solder Paste Printing

12/06/2017 | Stephen Las Marias, I-Connect007
The solder paste printing process has always been considered a major contributor to yield loss. According to many studies, solder paste printing accounts for up to 70% of all PCB assembly defects. For the December issue of SMT Magazine, we interviewed experts in the solder paste printing process to learn more about the key issues leading to this huge percentage of defects, and the technology developments that are addressing these challenges and improving yields in the process.



Copyright © 2017 I-Connect007. All rights reserved.