Rehm Presents New Innovations at SNEC and NEPCON


Reading time ( words)

This April, Rehm Thermal Systems will appear at two major international trade fairs in Asia, which are both going to be held in Shanghai, China: SNEC, from April 1921, and NEPCON China, from April 2527.

SNEC

SNEC is one of the most renowned solar industry platforms in Asia. With over 1500 exhibitors from 90 countries, it is one of the world's largest trade fairs in the photovoltaics sector. This year, Rehm will be showcasing the VOC Thermal Oxidizer, designed for exceptionally efficient and sustainable solar cell manufacture. 

Reduce VOCs by 99.9% with the Thermal Oxidizer

VOC_Thermal_Oxidizer.jpgIn the VOC Thermal Oxidizer, Rehm is offering one of the most effective residue management systems on the market. During the heating process, the volatile organic compounds (VOCs) released by the pastes are cracked and converted almost entirely into carbon dioxide and water. All available systems operate with a separation efficiency reaching up to 99.9%, ensuring compliance with German air pollution regulations. Oxidizer systems with heat recovery such as the available counter flow reactor (CFR) are also particularly energy-efficient and eco-friendly. 

Visitors to Rehm's stand (Booth E3-001) can also find out more about new systems developments in the solar sector. The product portfolio ranges from efficient firing systems for standard mono- and multicrystalline metalization of solar cells to high-quality solar dryers. The flexible, modular structure allows for a variety of different production layouts, while reduced energy consumption and higher performance make the systems ideal for a wide variety of uses. 

NEPCON China

NEPCON China is one of the biggest names in electronics industry trade fairs in Asia. Rehm Thermal Systems is one of over 500 leading companies who will be exhibiting innovations and the latest systems technology for modern and efficient electronics manufacture in Shanghai. Rehm will be at Booth 1E40. 

VisionXP+.jpgVisionXP+ Vac: The 2-in-1 solution for convection reflow soldering

The VisionXP+ convection soldering system combines various advances in technology, particularly with regard to energy efficiency optimisation and emissions reduction. It allows customers to reduce energy use in electronics manufacture by up to 20% and consumes on average 10 tonnes less CO2 per year. For the first time ever, the vacuum option makes it possible for convection soldering to take place with or without a vacuum – in one system! The VisionXP+ Vac reliably removes gas cavities and voids during the soldering process, while the solder is still in its optimum molten state. With a vacuum pressure of up to 2 mbar, void rates of less than 2% can be achieved. 

CondensoXC.jpgCondensoXC: Compact structure – huge performance

The CondensoXC, designed for reliable condensation soldering, has a compact structure thanks to its innovative processing chamber. And it performs in a big way. With its patented injection principle, the exact amount of Galden® required is added to the process for optimal profiling. The closed-loop filter system allows almost 100% of the medium to be regained and filtered. The system is completely suitable for vacuums and has an integrated process recorder for maximum traceability. 

About Rehm Thermal System

As a specialist in the field of thermal system solutions for the electronics and photovoltaics industries, Rehm is a technology and innovation leader in the modern and economical production of electronic modules. As a globally operating manufacturer of reflow soldering systems with convection, condensation or vacuum, drying and coating systems, functional test systems, equipment for the metallization of solar cells as well as numerous customer-specific special systems, we are represented in all relevant growth markets and, as a partner with more than 25 years of industry experience, we implement innovative manufacturing solutions that set standards.

Share


Suggested Items

Video from productronica 2017: Mycronic Discusses Precision Jetting Systems

11/17/2017 | I-Connect007
From the show floor during productronica 2017, Clemens Jargon, VP of Global Dispensing at Mycronic, discusses with I-Connect007 Technical Editor Pete Starkey the company’s portfolio of precision jetting equipment, with particular reference to the speed and versatility of the MYSmart series.

Solder Preforms 101: Ask the Expert

11/13/2017 | Patty Goldman, I-Connect007
At the recent SMTA International 2017 event, Jerry Sidone, product manager for the engineered materials at Alpha Assembly Solutions, speaks with I-Connect007 Managing Editor Patty Goldman about the voiding challenge, especially with bottom termination components, and how solder technologies from Alpha are helping PCB assemblers address this issue.

HDI Considerations: Interview with ACDi's Garret Maxson

11/10/2017 | Stephen Las Marias, I-Connect007
Garret Maxson, manager of engineering services at American Computer Development Inc. (ACDi), discusses the PCB assembly challenges when dealing with high-density interconnect (HDI) boards, parameters to consider, and strategies to help facilitate a smooth assembly process when using HDI boards.



Copyright © 2017 I-Connect007. All rights reserved.