AIM Provides IPC-A-610 Training to Sony Employees in Nuevo Laredo, Mexico


Reading time ( words)

AIM Solder is pleased to announce that it recently provided IPC-A-610 training to Sony employees in Nuevo Laredo, Tamaulipas, Mexico. 

AIM’s Technical Marketing Engineer, Andres Rojas, provided the Certified IPC Specialist (CIS) training, which is designed to prepare line workers, operators, inspectors, managers and buyers to make informed decisions when assessing the quality and reliability of electronic assemblies according to the IPC quality standard. 

“I’m always excited to provide these trainings and support the local industry,” said Andres Rojas, Technical Marketing Engineer. “This initiative substantiates AIM’s efforts to support the growth of the electronics industry in Mexico.” 

About AIM

Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products such as solder paste, liquid flux, cored wire, bar solder, epoxies, lead-free and halogen-free solder products, preforms, and specialty alloys such as indium and gold for a broad range of industries. A recipient of many prestigious SMT industry awards, AIM is strongly committed to innovative research and development of product and process improvement as well as providing customers with superior technical support, service and training. For more information about AIM, visit www.aimsolder.com

Share

Print


Suggested Items

Tips & Tricks: Water Contamination and Flux Expiry

04/17/2019 | Jason Fullerton, MacDermid Alpha Electronics Solutions
Solder joints that form properly are not expected to exhibit reduced reliability. However, a higher number of defects created tends to lead to a higher chance that defective connections escape detection through inspection and functional testing, and that’s not a risk to be taken lightly.

Tips & Tricks: Humidity Level for Electronics Assembly

04/10/2019 | Jason Fullerton, MacDermid Alpha Electronics Solutions
Low relative humidity (RH) can allow for higher static charges to build on objects. It can also affect solder pastes, especially OR-class pastes, and this can reduce print performance and stencil life. Read on to find out what level of RH you need for your assembly facility.

IPC Working to Revive Lead-Free R&D in High-Reliability Sectors

04/10/2019 | Chris Mitchell, IPC VP, Global Government Relations
Ask yourself the following question: Why is it that the aerospace, defense and high performance (ADHP) electronics sectors remain reliant on lead solders and components even as the commercial sector has largely phased out their use?



Copyright © 2019 I-Connect007. All rights reserved.