Kester to Showcase Latest Technologies at SMT Hybrid Packaging 2017


Reading time ( words)

Kester will be exhibiting its latest solder paste products and fluxes at SMT Hybrid Packaging 2017, which will take place May 16–18, 2017 at the Exhibition Centre in Nuremberg, Germany. Kester will be in Booth 4-533.

At the event, attendees will have the opportunity to meet with the Kester sales team and learn more about Kester’s new products, including the NP545 a zero-halogen, lead-free, no-clean solder paste with a 12-month unrefrigerated shelf life; the NP505-HR a zero-halogen, lead-free, no-clean solder paste formula developed specifically for high-reliability applications; the NF372-TB a zero-halogen, no-clean, low solids liquid flux designed to withstand long dwell times and high preheat temperatures needed in thick board assemblies; and the SELECT-10, a zero-halogen no-clean liquid flux designed specifically for the needs of the selective soldering process.

About Kester

Kester is a global supplier of assembly materials for the Electronic Assembly and Semiconductor Packaging industries. Kester is focused on delivering innovative, robust and high-quality solutions to help our customers address their technological challenges. Kester’s current product portfolio includes soldering attachment materials such as solder paste, soldering chemicals, TSF (tacky solder flux) materials, and metal products such as bar, solid and flux-cored wire. Kester is an Illinois Tool Works (ITW) company. ITW is a Fortune 200 company that produces engineered fasteners and components, equipment and consumable systems, and specialty products. It employs approximately 49,000 people, and is based in Glenview, Illinois, with operations in 57 countries.

Share

Print


Suggested Items

The Effectiveness of 75% IPA/25% DI Extraction Solution on No-clean Flux Residues

06/13/2019 | David Lober and Mike Bixenman, DBA, KYZEN; and Marietta Lemieux and Mark McMeen, STI
The continuous challenge in the electronics industry is to keep up with the demand for smaller, faster, and more reliable electronics. When it comes to cleaning, this rapid development of manufacturing and reliability challenges is juxtaposed with the slow pace of new test method development.

Laserssel Brings High-speed Soldering to New Application Areas

06/10/2019 | Barry Matties, I-Connect007
In this interview with I-Connect007, Denis Barbini, general manager of Laserssel, talks about the company's new laser-selective reflow solution aimed at reducing a typical reflow oven’s 10-minute cycle down to just 10 seconds as well as the overall benefits manufacturers could see from streamlining this process.

Minimizing Voids in Solder Joints

06/07/2019 | Rehm Thermal Systems
Dr. Hans Bell of Rehm Thermal Systems, Henryk Maschotta of Thales Deutschland GmbH, and Dr. Heinz Wohlrabe of TU Dresden presented the results of their project on reducing void content in the solder joints of land grid arrays (LGAs) at a soldering seminar during the Technology Days of the recent SMTconnect show in Nuremberg.



Copyright © 2019 I-Connect007. All rights reserved.