SEHO Focuses on 100% Process Control


Reading time ( words)

SEHO Systems GmbH will focus on automatic process control in Hall 4, Stand 129 at the upcoming SMT/Hybrid/Packaging show, scheduled to take place May 16-18, 2017 at the Messe in Nuremberg, Germany. The selective soldering system SEHO SelectLine-C has been even further optimized. 

SEHO will introduce its new cross sensor at the exhibition that takes over several functions. On the one hand, the wave height is precisely controlled. The measurement is made touchless directly at the solder nozzle and it is fully independent from the solder alloy used. In addition, the cross sensor is also used for automatic tool measurement: diameter, height and mounting position of the solder nozzle are automatically controlled, thus excluding potential operator errors. 

Also new, being introduced for the first time, is an automatic nitrogen flow quantity control. 

SEHO is the only manufacturer worldwide which offers the opportunity to integrate additional processes directly into its selective soldering systems. This includes, for example, a brush system for solder joint cleaning or an AOI system for automatic detection of soldering defects. The benefits are obvious: no additional floor space is required in the production area. At the same time production costs will be reduced as the entire board handling is performed by the axes systems that are integrated in the selective soldering machine anyway. 

By adding an intelligent handling concept from SEHO, assemblies that have been identified as defective can automatically be removed from the production line. 

The new process control functions ideally supplement already existing features such as flux quantity monitoring, monitoring of the nitrogen quality or the automatic position and z-height correction thus ensuring a 100 % process control. 

For further information, please visit SEHO in booth # 4-129 at SMT/Hybrid/Packaging or online at www.seho.de

Share


Suggested Items

DFx on High-Density Assemblies

12/01/2017 | Jonas Sjoberg, Chris Nash, David Sbiroli, and Wisdom Qu, Indium Corporation
Use of new technologies poses a number of challenges for solder paste selection, PCB design, assembly process, and reliability. The type of end product will have different challenges, concerns, and requirements in all aspects. The assembly line for many of these end products will look very similar, but specification limits would be different.

Creating the Perfect Solder Joint

11/03/2017 | Stephen Las Marias, I-Connect007
From a visual standpoint, a good solder joint should be smooth, bright, shiny, clean, and have a nice concave solder fillet. But how do you ensure that inside those joints, good intermetallic bonds are formed? Solder joints play several different roles, and they represent several different opportunities to be a problem, a partial improvement, or a complete improvement. Since all solder joints aren’t created equal, the first step is to understand what is expected or required of that joint.

Cleaning Trends: The Challenges of Miniaturization and Proximity

11/01/2017 | Patty Goldman, I-Connect007
At the recent SMTA International conference, I-Connect007 Managing Editor Patty Goldman caught up with Ram Wissel, VP of Global Technology at KYZEN, to talk about the latest cleaning challenges, and bringing Industry 4.0 into the world of cleaning in PCB assembly.



Copyright © 2017 I-Connect007. All rights reserved.