AIM's Andres Rojas to Present at the SMTA Queretaro Tech Forum


Reading time ( words)

AIM Solder is pleased to announce that Andres Rojas, technical marketing engineer, will present at the SMTA Queretaro Tech Forum, scheduled to take place on May 3, 2017 at the Holiday Inn Centro Queretaro in Queretaro, Mexico. AIM will also highlight its revolutionary REL61 lead-free solder alloy, along with its full line of solder assembly materials, including its newly developed REL22 solder alloy for extremely harsh environments.

Andres's presentation will highlight guidelines for successful pin-in-paste print and reflow method.  The presentation will address how to overcome common obstacles to successfully implement the pin-in-paste technique, including adequate hole-fill, solder displacement and thermally massive PCBs.

To discover all of AIM’s products and services, visit the company at the SMTA Queretaro Tech Forum for more information.

About Andres Rojas

Andres Rojas is the Technical Marketing Engineer for AIM Solder. Andres possesses over a decade of technical experience in the electronics industry.  In addition to his vast practical experience, he is a certified instructor for IPC-A-610, 7711, 7712, and J-STD-001. Andres is also an expert in lean manufacturing with a Six Sigma Blackbelt.

About AIM

Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products such as solder paste, liquid flux, cored wire, bar solder, epoxies, lead-free and halogen-free solder products, preforms, and specialty alloys such as indium and gold for a broad range of industries. A recipient of many prestigious SMT industry awards, AIM is strongly committed to innovative research and development of product and process improvement as well as providing customers with superior technical support, service and training. For more information about AIM, click here

Share


Suggested Items

Solder Printing Process Inputs Impacting Distribution of Paste Volume

12/14/2017 | Marco Lajoie and Alain Breton, C-MAC Microelectronics
The volume of solder deposition, like any process, has variations that may be characterized by a statistical distribution curve, whether normal or non-normal. As complexity, density, cost and reliability requirements increase, there may be value in narrowing the distribution curve. It is common sense that less variation serves the interest of quality of the more complex and dense circuit boards.

Improving Solder Paste Printing

12/12/2017 | Stephen Las Marias, I-Connect007
Of the three elements involved in the solder paste printing process—stencil, solder paste, and printer—the stencil is considered one of the major factors affecting the transfer efficiency, accuracy, and consistency, of solder pastes into the pads, especially with the continuing trend towards miniaturization.

Equipment Matters in Solder Paste Printing

12/06/2017 | Stephen Las Marias, I-Connect007
The solder paste printing process has always been considered a major contributor to yield loss. According to many studies, solder paste printing accounts for up to 70% of all PCB assembly defects. For the December issue of SMT Magazine, we interviewed experts in the solder paste printing process to learn more about the key issues leading to this huge percentage of defects, and the technology developments that are addressing these challenges and improving yields in the process.



Copyright © 2017 I-Connect007. All rights reserved.