Incap Posts 26% Revenue Growth in January-March 2017

Reading time ( words)

Key figures in January-March 2017

  • The Group's revenue amounted to EUR 11.0 million, up 26% on the corresponding period of previous year (Jan-Mar 2016: EUR 8.7 million).
  • The Group's operating profit (EBIT) amounted to EUR 1.0 million, down 17% on the corresponding period (EUR 1.2 million).
  • Net profit for the period amounted to EUR 0.66 million, up 2% on the corresponding period (EUR 0.65 million).
  • The company repeats its previous outlook for full year 2017.  

Key events of the period

Incap Group's revenue for January-March 2017 developed favourably both in India and in Estonia, growing by 26% on the comparison period. The growth was mainly based on increased demand of long-term customers.

The operating profit (EBIT) amounted to EUR 1.0 million, showing a decrease of 17% on the comparison period last year. Major reason for the decrease was the higher material costs. Due to the current growth of global electronics market the prices of main commodity raw materials such as copper, led and tin are increasing, resulting in higher component prices. 

The Group's operating profit margin amounted to 8.8%, being in the upper end of the common levels in the electronics manufacturing services business. During the preceding quarter October-December 2016 the operating profit amounted to 10.5% and in the corresponding period January-March 2016 to 13.4%.

The extension of the export production facilities in India was inaugurated during the review period. Also in the factory in Estonia the manufacturing capacity was increased by a new SMT line.

Outlook for 2017

Incap repeats its previous guidance and outlook for the year 2017. The Group's revenue in 2017 is estimated to be higher than in 2016 when it was EUR 38.6 million. The operating profit (EBIT) is estimated to be somewhat higher than in 2016 when it was EUR 4.4 million. The figures have been estimated based on the assumption that there are no major changes in exchange rates.

Incap will publish its half-year report for January-June 2017 in accordance with IAS 34 on Wednesday, 23 August 2017.  

Ville Vuori, President and CEO of Incap Group:

"The first quarter of 2017 met with our expectations. The production portfolio was as forecasted a bit unfavorable with respect to profitability due to high material shares and increasing raw material prices, which will take some time to mitigate. The increase in volumes is positive and improves our position in many ways.

Overall, our outlook remains positive. We are expecting organic growth to continue and even though the relative profitability is approaching the market standards levels, we trust in our business model and aim to be among the best in the peer group also in future especially in terms of profitability."

About Incap Corporation

Incap Corporation is an international electronics contract manufacturer. Incap's customers are leading suppliers of high-technology equipment in their own business segments, and Incap increases their competitiveness as a strategic partner. Incap has operations in Finland, Estonia, India and Hong Kong, and the company currently employs approximately 520 people. Incap's share is listed on the Nasdaq Helsinki Ltd. as from 1997. Additional information:


Suggested Items

Manufacturability: Pad Relief and Mask Relationship to Solder Joint Volume

03/09/2018 | Ken Horky, Peterson Manufacturing
Electronic assembly thermal management has always been an issue but has become more significant as we pack more power and function into a smaller form factor. In recent years, the growing use of LEDs for illumination on a large scale has presented additional thermal demands.

PCB Pad Repair Techniques

01/08/2018 | Bob Wettermann, BEST Inc.
There are a variety of reasons behind pads getting "lifted" completely or partially from the laminate of a PCB. Per the just revised IPC-A-610 Revision G, a defect for all three classes occurs when the land is lifted up one or more pad thicknesses. Lifted pads can occur when a device has been improperly removed or there is a manufacturing defect in the board construction. In any case, as with any repair, the ultimate decision on the ability to repair the pad lies with the customer.

Focus on the New

01/05/2018 | Stephen Las Marias, I-Connect007
It seems like it wasn't too long ago when I was writing about the optimism of the electronics manufacturing and assembly industry going into 2017. Now, here we are again at the beginning of the new year, looking at new trends, disruptive technologies, and emerging markets for 2018. I am also proud to announce our new branding as well as our fresh, new look.

Copyright © 2018 I-Connect007. All rights reserved.