TopLine Exhibiting CCGA, Solder Joint Reliability Solutions at Space Tech Expo


Reading time ( words)

TopLine Corporation will exhibit its innovative CCGA technology and solder joint reliability solutions in booth #8023 at the Space Tech Expo show May 23-25, 2017 in Pasadena, California, USA. Space Tech Expo USA is America’s engineering and manufacturing meeting place for space technology. The show will be held at the Pasadena Convention Center, 300 E. Green St., Pasadena, CA 91101. 

Featured TopLine products will include CCGA - Column Grid Arrays and daisy chain BGA test vehicles. CCGA Column Grid Array IC packages are made with non-collapsible solder columns for surface mount soldering on printed circuit boards (PCBs), and provide more compliancy than solder balls (Ball Grid Arrays or BGAs) to absorb stress and increase solder joint reliability under harsh operating conditions. 

CCGAs reduce stress caused by CTE mismatch, thereby increasing reliability of semiconductor components for space, mil/aero, down-hole drilling and special automotive and medical applications. CCGA technology increases life for FPGA (Field Programmable Gate Arrays). CCGAs are better than BGAs for rugged operating environments.

About TopLine

TopLine Corporation is a leading provider of test vehicle components and packaging solutions for Circuit Assemblies. TopLine manufactures CCGA Column Grid Arrays, solder columns, and a wide range of daisy chain semiconductor packages, and offers a complete range of daisy chain test chips for process development, experimentation, machine evaluation, solder training, and SMT assembly practice. TopLine products provide hands-on learning for engineers. TopLine is a one-stop source for all dummy components. For more information, contact TopLine Corporation, Tel (800) 776-9888; Email: sales@TopLine.tv

Share


Suggested Items

Under the Hood: Solder Joint Reliability

05/21/2018 | Burton Carpenter, NXP Semiconductors Inc.
It has been long established that packages using NSMD BGA pads were more resilient than ones with SMD pads to fatigue-induced solder joint cracks. However, NSMD pads in previous investigations on 292MAPBGA and 416PBGA packages failed sooner in AATS testing due to an alternate failure mode: substrate Cu trace cracks. This article looks into the effects of substrate material and package pad design on solder joint reliability of 0.8 mm pitch BGA.

Solving Reliability and Thermal Management Challenges in Automotive Electronics

05/01/2018 | Stephen Las Marias, I-Connect007
Paul Salerno, global portfolio manager for SMT assembly solutions at Alpha Assembly Solutions, discusses the growing automotive electronics industry, its impact on the soldering materials business, and how Alpha helps customers address the new challenges and requirements in the automotive market.

Investigating Analytical Tools for Testing Cleanliness with Foresite's Eric Camden

04/19/2018 | Patty Goldman, I-Connect007
At the recent West Penn SMTA Expo, Eric Camden, lead investigator at Foresite Inc., speaks with I-Connect007's Patty Goldman about fluxes and analytical tools for testing cleanliness, and how these impact the reliability of the assembled boards.



Copyright © 2018 I-Connect007. All rights reserved.