Indium Experts Present at SMTA ICSR 2017


Reading time ( words)

Several Indium Corporation experts will present at the SMTA International Conference on Soldering and Reliability (ICSR) 2017 on June 6-8 in Ontario, Canada.

Brook Sandy-Smith, technical support engineer for PCB assembly materials, will present "Investigating Solder Paste Performance after Worst-Case Shipping Scenarios". Her discussion will include extended shelf life solder pastes, highlighting significant findings from her extensive studies. In addition, Sandy-Smith will moderate the Bottom Termination Component Design Panel at 3 p.m. on June 8.

Dr. HongWen Zhang, research metallurgist, will present "High-Temperature Lead-Free Die-Attach Materials: A Review", which details the metallurgical perspectives of specific die-attach materials, including melting point, interfacial IMC formation, microstructural evolution, and feasible material forms. He will also compare the processing and the cost of each solution with currently available high-lead solders.

Dr. Sihai Chen, research chemist, will present "Low-Temperature Sinterable Silver Paste for High-Power Die-Attach Applications". His presentation will highlight the development of a new silver paste that can be sintered at temperatures as low as 173°C, production of a silver sintering joint with no voids and high thermal conductivity (200W/mK), and the thermal stability of the silver joints and bonding mechanism.

Sandy-Smith specializes in PCB assembly materials, particularly solder paste. She conducts application testing and qualifications for new product introductions. Sandy-Smith earned degrees in chemical engineering (with a focus on materials) and German language from the University of Rhode Island. She previously worked in R&D, developing conductive adhesives for die- and strap-attach, as well as conductive inks for RFID applications. Her areas of expertise include analytical testing of conductive materials, applications such as screen-printing and jet dispensing (jetting), as well as scale-up and pre-production of developmental materials.

Dr. Zhang specializes in the development of Pb-free solder materials for high-temperature and/or high-fatigue resistance applications, and investigating the associated technologies. He and Dr. Ning-Cheng Lee, Vice President of Technology for Indium, invented the mixed powder solder technique in which minor additives are used to improve wetting and modify the bonding interface, thus increasing the bonding strength. On the basis of this technique, the BiAgX solder system was invented as an alternative high-temperature lead-free solder. Dr. Zhang earned his bachelor’s degree in Metallurgical Physical Chemistry from Central South University of China, his master’s degree in Materials Science and Engineering from the Institute of Metal Research, Chinese Academy of Sciences, his master’s degree in Mechanical Engineering and his Ph.D. in Material Science and Engineering from Michigan Technological University. He also holds a Six Sigma Green Belt from the Thayer School of Engineering at Dartmouth College, and is a certified IPC Specialist for IPC-A-600 and IPC-A-610D.

Dr. Chen specializes in silver sintering paste product development. He has authored several Indium patents for silver sintering paste, thermal interface material, heat dissipating paint, and indium bump bonding. Dr. Chen has published more than 40 papers in journals, including the Journal of the American Chemical Society, Nano Letters, Langmuir, and The Journal of Physical Chemistry. He earned his doctorate in Chemistry from the Chinese Academy of Sciences with a focus on metal and semiconductor nanomaterial synthesis. Dr. Chen also holds a Six Sigma Green Belt and has been certified as an IPC Specialist for IPC-A-610.

About Indium

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, Indium has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, click here.

Share


Suggested Items

Under the Hood: Solder Joint Reliability

05/21/2018 | Burton Carpenter, NXP Semiconductors Inc.
It has been long established that packages using NSMD BGA pads were more resilient than ones with SMD pads to fatigue-induced solder joint cracks. However, NSMD pads in previous investigations on 292MAPBGA and 416PBGA packages failed sooner in AATS testing due to an alternate failure mode: substrate Cu trace cracks. This article looks into the effects of substrate material and package pad design on solder joint reliability of 0.8 mm pitch BGA.

Solving Reliability and Thermal Management Challenges in Automotive Electronics

05/01/2018 | Stephen Las Marias, I-Connect007
Paul Salerno, global portfolio manager for SMT assembly solutions at Alpha Assembly Solutions, discusses the growing automotive electronics industry, its impact on the soldering materials business, and how Alpha helps customers address the new challenges and requirements in the automotive market.

Investigating Analytical Tools for Testing Cleanliness with Foresite's Eric Camden

04/19/2018 | Patty Goldman, I-Connect007
At the recent West Penn SMTA Expo, Eric Camden, lead investigator at Foresite Inc., speaks with I-Connect007's Patty Goldman about fluxes and analytical tools for testing cleanliness, and how these impact the reliability of the assembled boards.



Copyright © 2018 I-Connect007. All rights reserved.