SMTA and CALCE Seeking Abstracts for 3rd Annual LED A.R.T. Symposium


Reading time ( words)

The SMTA and CALCE are pleased to announce the LED Assembly, Reliability, and Test (A.R.T.) Symposium will take place from November 28–30, 2017 at the Archie K. Davis Conference Center in Research Triangle Park, North Carolina. 

The LED Assembly, Reliability & Testing (A.R.T.) Symposium will provide attendees with information to bridge the gap between the semiconductor physics and the architectural design level issues in LED supply chain. The design, manufacturing, reliability assessment, testing and inspection of LEDs and LED lighting products are not at the same level of development and interest. The LED A.R.T. Symposium is the forum for the industry to explore the problems faced and offer solutions.

The topics of interest include but not limited to:

  • LED Assembly
  • LED Failure Mechanisms
  • LED Packaging
  • Applications
  • Reliability and Testing
  • Package and Board Cleaning
  • Architectural/Smart Lighting
  • UV and IR LEDs
  • Wearable Sensors-LEDS
  • LED Driver System

If you would like to present at this conference, please submit a 200-300 word abstract here by July 1, 2017. Please include a title, author name, and contact information with your abstract. You can also submit proposals for half or full day workshops.

About SMTA

The SMTA membership is an international network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies, including microsystems, emerging technologies, and related business operations.

About CALCE

The Center for Advanced Life Cycle Engineering (CALCE), the largest electronic products and systems research center focused on electronics reliability, is dedicated to providing a knowledge and resource base to support the development of competitive electronic components, products and systems.

Share

Print


Suggested Items

ICT or Flying Probe: Which Test Is Best for Your Assembly?

07/10/2019 | Russell Poppe, JJS Manufacturing
In-circuit test (ICT) and flying probe are two of the most popular types of automated test equipment (ATE) used in electronic printed circuit board assembly (PCBA).

Cavity Board SMT Assembly Challenges (Part 1)

06/26/2019 | By Dudi Amir and Brett Grossman, Intel Corp.
The concept behind Component-in-Cavity (CiC) is straightforward. If the tallest component(s) on the motherboard can be placed into a recession created in the motherboard, their thickness relative to the components on the surface of the PCB will thus effectively be reduced. While this concept may be straightforward, its implementation is not. That implementation is the focus of this paper. Read on.

Collaboratively Creating Wearable Medical Products

05/28/2019 | I-Connect007 Editorial Team
Patty Goldman, Barry Matties, and Happy Holden recently spoke with David Moody and Rich Clemente of Lenthor Engineering along with Anthony Flattery and Amit Rushi—their customers at GraftWorx. They discussed a recent project and how they worked together to solve a difficult problem by designing a rigidized flex circuit for their product.



Copyright © 2019 I-Connect007. All rights reserved.