Seika Intros Twin-Table PCB Router with Online Camera for Programming


Reading time ( words)

Seika Machinery, Inc. is pleased to introduce the new Sayaka SAM-CT34NJW Twin Table PCB Router with online camera for programming.

The system features advanced image-processing software with point-and-click operation for programming router paths. The CCD camera captures an image of the PCB, while programming cutting paths is achieved by simple point-and-click operation on screen. An ideal solution for stress-free depanelization, the high-speed router bit cleanly and precisely cuts densely populated PCBs without stressing the PCB. Cut paths can be as close as 0.5mm to a component.

The two-way flexible setting twin-table design provides faster, high precision processing and accommodates two boards up to 200 x 250mm. The flexible twin fixture tables can be converted into one large size fixture table that accommodates one PCB up to 400 x 250mm.

The automatic bit depth control feature extends bit life and reduces bit usage. The online camera provides QR code reading to upload program and fiducial check with auto alignment of each panel. 

About Seika Machinery, Inc.

Seika Machinery, Inc. (SMI) is a subsidiary of Seika Corporation, Japan and member of the Mitsubishi Global Group. SMI provides electronics manufacturers with advanced machinery, superior materials and engineering services.

Share

Print


Suggested Items

Just Ask Joe: Automotive Conformal Coatings

08/21/2020 | I-Connect007 Research Team
First, we asked you to send in your questions for Happy Holden. Now, it’s Joe Fjelstad’s turn! Inventor, columnist, instructor, and founder of Verdant Electronics, Joe has been involved with rigid PCBs and flexible circuits for decades, and he’s ready to share some of his knowledge with our readers. We hope you enjoy “Just Ask Joe.”

Surface Treatment Enabling Low-Temperature Soldering to Aluminum

07/15/2019 | Divyakant Kadiwala, Averatek Corporation
An increasingly popular method to meet the need for lower cost circuitry is the use of aluminum on polyester (Al-PET) substrates. This material is gaining popularity and has found wide use in RFID tags, low-cost LED lighting, and other single-layer circuits. However, both aluminum and PET have their own constraints and require special processing to make finished circuits.

Lionrock Delivers Bendable, Industrial-grade Battery Tech

04/24/2019 | Nolan Johnson, I-Connect007
David Yeung, co-founder and CEO of Lionrock Batteries, discusses previous projects—including smartwatch straps—and his collaboration with the Nano and Advanced Materials Institute (NAMI) in Hong Kong on wearable, flexible battery technology at CES 2019.



Copyright © 2020 I-Connect007. All rights reserved.