Mycronic Receives Order for Prexision-MMS System and an Upgrade


Reading time ( words)

Mycronic AB has received an order for a Prexision-MMS for quality assurance of advanced photomasks from a customer in Asia. The system is scheduled to be delivered in the end of 2018. At the same time, the customer has ordered an upgrade of a previously delivered mask writer Prexision-8. This system will be upgraded to a full scale Generation 10 (G10) photomask production unit.

The total order value, including the Prexision-MMS and the Prexision system upgrade, is in the span $18-22 million.

Mycronic offers mask writers for the manufacturing of photomasks within different fields of application. These areas are display manufacturing (for TV, smart phones and tablets among other things) and applications within the multi-purpose market, a broad segment comprising many different application areas, such as electronic packaging, MEMS, touch panels and other similar applications.

"We are happy to announce that our customer has now decided to upgrade one of their systems to enable manufacturing of large G10 photomasks. As they also ordered a system for quality assurance they secure efficient production of high quality large photomasks," says Magnus Råberg, Sr VP & General Manager Pattern Generators at Mycronic. "We see the market needs for quality assurance of the largest photomasks. Therefore we have decided to further develop our Prexision-MMS, which was initially developed to secure high quality production of photomasks with Prexision-80 and Prexision-800, to include also G10 photomasks."

Share


Suggested Items

Blockchain for Manufacturing: What are the Opportunities?

11/17/2017 | Neil Sharp, JJS Manufacturing
Blockchain is one of the hottest topics in the tech world, and a buzzword that’s been popping up quite a bit over the last year or so. It is said to have the potential to radically simplify many business processes, by reducing risk and boosting transparency. In the manufacturing world, what are its opportunities?

Should I Involve My EMS Partner in DFM?

10/26/2017 | Neil Sharp, JJS Manufacturing
OEMs are seeking the support of EMS providers with more than just manufacturing, but with design elements too. One of the main design services EMS providers will be likely to offer is design for manufacture (DFM). This article highlights why engaging your EMS partner in DFM is worthwhile, and will be valuable in securing the longevity of your product.

Test Solutions Your EMS Partner Should Offer

10/20/2017 | Neil Sharp, JJS Manufacturing
When looking to outsource your manufacturing, you need to know that your chosen EMS partner has good test solutions in place so that they can produce consistent, high-quality products to your customers’ requirements. This article highlights the importance of test, and outlines the different types of test your EMS partner should offer.



Copyright © 2017 I-Connect007. All rights reserved.