Essemtec to Show All-in-One Jetting/Placement System at SMTA Capital Expo


Reading time ( words)

Essemtec will exhibit at the SMTA Capital Show, scheduled to take place on Aug. 24, 2017. The company will demonstrate the FOX2, which combines jetting of solder paste or glue and placement in a single machine.

In many electronics production plants, new product introductions and prototype runs are still considered special processes. As as a result, certain aspects are rushed during the ramp-up, and ongoing production runs can suffer from excessively long and expensive interruptions. Using Essemtec‘s all-in-one solutions, you can stop this by establishing consistent, highly efficient and reliable NPI processes.

FOX2 has a machine footprint of just 1 square meter and can accept PCB sizes up to 16 x 12". Larger PCB machines are available. Components with sizes from 01005 up to 1.3 x 3.1" are placed. The machine achieves 10,800 cph (IPC9850) with the release of ePLACE 23 and still provides 50 µm accuracy, 3 sigma with a two nozzle head.

About Essemtec AG

Essemtec AG is a privately held Swiss equipment manufacturer, specializing in high speed fluid dispensing as well as flexible high-mix SMT placement solutions. Both divisions leverage the company’s vast equipment and process know-how gained since 1991 to let their customers achieve significant competitive advantages. The company’s goal is to improve its customers’ workflows, setup times, defect rates, traceability and overall manufacturing efficiency through superior software and by providing managed SMT storage.

Share


Suggested Items

Jigar Patel on ZESTRON’s Reliability Solutions for Class 3 Assemblies

06/14/2018 | Patty Goldman, I-Connect007
At the SMTA West Penn Expo, I had a chance to discuss a paper presented by Jigar Patel, senior application engineer at ZESTRON. Jigar explained some of the cleaning challenges with newer components and how ZESTRON helps optimize cleaning processes for their customers.

A Not So Surprising Focus for Flex in the XR Realm

03/14/2018 | Dan Feinberg
Dan Feinberg has been covering augmented, virtual, and mixed-reality for I-Connect007 for the last few years. He recently met with Eric Braddom, VP of Extended Reality (XR) Product Management for Flex, a company that is involved in this disruptive technology. In this interview, Dan and Eric discuss the future of augmented, mixed and/or virtual reality, or as Flex calls it, "extended reality."

RTW IPC APEX EXPO: Indium Discusses Fighting Solder Voids

03/06/2018 | Real Time with...IPC
Voiding has increasingly become one of the most critical challenges in the soldering process. In this interview, Christopher Nash, product manager for the PCB assembly solder paste business of Indium, speaks about how the company is helping customers address the voiding challenge.



Copyright © 2018 I-Connect007. All rights reserved.