KYZEN's Dr. Mike Bixenman Wins Best of Presentation Award at 2017 ICSR


Reading time ( words)

KYZEN Corporation CTO Dr. Mike Bixenman was selected to win the "Best of Presentation" Award at the 2017 International Conference on Soldering and Reliability (ICSR) for his presentation "Reliable Microelectronic Assembly Process Design Test Methods – A Non-Standard Approach." The award is determined through the evaluations of those that attended the presentation.

"I am most appreciative of the attendees at International Conference on Soldering and Reliability for selecting my presentation for the Best of Presentation award," said Dr. Bixenman. "There were many good presentations and to be recognized by my peers is a true honor."

The scope of the International Conference on Soldering and Reliability was broadened this year to include the physical design aspects relating to electronics component, product and system reliability, involving such topics as thermal and mechanical design, design for manufacturability, test and signal integrity.

Plans for the 2018 conference are currently under way and more information will be announced at a later date.

All papers presented at the conference can be found in the conference proceedings available online in the SMTA Bookstore, click here.

About SMTA - A Global Association Working at a Local Level

The SMTA membership is an international network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies, including microsystems, emerging technologies, and related business operations.

Share


Suggested Items

HDI Considerations: Interview with ACDi's Garret Maxson

11/10/2017 | Stephen Las Marias, I-Connect007
Garret Maxson, manager of engineering services at American Computer Development Inc. (ACDi), discusses the PCB assembly challenges when dealing with high-density interconnect (HDI) boards, parameters to consider, and strategies to help facilitate a smooth assembly process when using HDI boards.

Should I Involve My EMS Partner in DFM?

10/26/2017 | Neil Sharp, JJS Manufacturing
OEMs are seeking the support of EMS providers with more than just manufacturing, but with design elements too. One of the main design services EMS providers will be likely to offer is design for manufacture (DFM). This article highlights why engaging your EMS partner in DFM is worthwhile, and will be valuable in securing the longevity of your product.

The Root Causes & Solutions for Warped PC Boards

09/27/2017 | Duane Benson, Screaming Circuits
There are two primary types of causes of board warping: process related at the fab or assembly shop, and layout related issues. If it's warped before assembly, it's between fab and layout. If it's flat before assembly and warped after, it's most likely between layout and assembly. That said, sometimes a fab problem won't show up until a pass through the reflow oven at your assembly partner.



Copyright © 2017 I-Connect007. All rights reserved.