Indium's Brook Sandy-Smith to Present at EDI CON USA


Reading time ( words)

Indium Corporation's Brook Sandy-Smith, technical support engineer for PCB assembly materials, will present at the Electronic Design Innovation Conference (EDI CON) and Exhibition 2017, to be held September 11–13 in Boston, Massachusetts.

Sandy-Smith will present "Overcoming Assembly Challenges with Bottom Termination Components (BTCs)." This presentation will review the updated recommendations for design and implementation of BTCs, including major changes made to IPC-7093. Sandy-Smith will also share strategies to minimize voiding and ensure robust BTC assemblies.

Sandy-Smith is a Technical Support Engineer specializing in printed circuit board assembly materials, particularly solder paste. She conducts application testing and qualifications for new product introductions. Sandy-Smith earned degrees in chemical engineering (with a focus on materials) and German language from the University of Rhode Island. She previously worked in R&D, developing conductive adhesives for die- and strap-attach, as well as conductive inks for RFID applications. Her areas of expertise include analytical testing of conductive materials, applications such as screen-printing and jet dispensing (jetting), as well as scale-up and pre-production of developmental materials.

About Indium

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, Indium has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, visit www.indium.com or email abrown@indium.com.

Share


Suggested Items

Video from productronica 2017: Mycronic Discusses Precision Jetting Systems

11/17/2017 | I-Connect007
From the show floor during productronica 2017, Clemens Jargon, VP of Global Dispensing at Mycronic, discusses with I-Connect007 Technical Editor Pete Starkey the company’s portfolio of precision jetting equipment, with particular reference to the speed and versatility of the MYSmart series.

Solder Preforms 101: Ask the Expert

11/13/2017 | Patty Goldman, I-Connect007
At the recent SMTA International 2017 event, Jerry Sidone, product manager for the engineered materials at Alpha Assembly Solutions, speaks with I-Connect007 Managing Editor Patty Goldman about the voiding challenge, especially with bottom termination components, and how solder technologies from Alpha are helping PCB assemblers address this issue.

HDI Considerations: Interview with ACDi's Garret Maxson

11/10/2017 | Stephen Las Marias, I-Connect007
Garret Maxson, manager of engineering services at American Computer Development Inc. (ACDi), discusses the PCB assembly challenges when dealing with high-density interconnect (HDI) boards, parameters to consider, and strategies to help facilitate a smooth assembly process when using HDI boards.



Copyright © 2017 I-Connect007. All rights reserved.