AIM's Mexico Facility Obtains Industria Limpia Certification


Reading time ( words)

AIM Solder's Juarez, Mexico facility successfully completed the recertification process for the Industria Limpia certification, bestowed by the Procuraduría Federal de Protección al Ambiente (PROFEPA). This certification is valid for two years.

The Industria Limpia certificate is bestowed by PROFEPA, federal agency responsible for the enforcement of environmental laws, upon companies that comply with Mexican environmental laws and regulations and successfully complete the audit on proper environmental procedures.

AIM has been a proud recipient of this certificate since 2011. Its participation in the National Program of Environmental Audits is one initiative that supports AIM’s ongoing efforts of social responsibility. With this certification, AIM reaffirms its commitment to the Mexican community by ensuring the well-being of local residents and contributing to initiatives that facilitate environmental protection and conservation.

About PROFEPA

The Procuraduría Federal de Protección al Ambiente (PROFEPA) is the organism in charge of preserving the environment and enforcing laws and regulations for environmental conservation. PROFEPA is a decentralized body of the Ministry of the Environment and Natural Resources (SEMARNAT).

About AIM

Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products such as solder paste, liquid flux, cored wire, bar solder, epoxies, lead-free and halogen-free solder products, preforms, and specialty alloys such as indium and gold for a broad range of industries. A recipient of many prestigious SMT industry awards, AIM is strongly committed to innovative research and development of product and process improvement as well as providing customers with superior technical support, service and training. For more information about AIM, click here.

Share


Suggested Items

Indium's Karthik Vijay Talks Engineering for Automotive Applications

01/22/2018 | Barry Matties, I-Connect007
Barry Matties met with Karthik Vijay, Indium Corporation's technical manager for Europe, at last year's productronica, where everything from stencils and laser cutting to flux technology and jetting were discussed. If you want to know about where material technology currently stands in the automotive landscape, you’ll want to read on.

PCB Pad Repair Techniques

01/08/2018 | Bob Wettermann, BEST Inc.
There are a variety of reasons behind pads getting "lifted" completely or partially from the laminate of a PCB. Per the just revised IPC-A-610 Revision G, a defect for all three classes occurs when the land is lifted up one or more pad thicknesses. Lifted pads can occur when a device has been improperly removed or there is a manufacturing defect in the board construction. In any case, as with any repair, the ultimate decision on the ability to repair the pad lies with the customer.

Top 10 Most-Read SMT007 Columns of 2017

01/02/2018 | I-Connect007
Another year is over in the SMT industry. 2017 saw a myriad of hot topics, including Industry 4.0, the millennials’ entry into the manufacturing space, and alternative solder materials, to name a few. Without further ado, here are the Top 10 columns from SMT007 over the past year.



Copyright © 2018 I-Connect007. All rights reserved.