Indium Features Indium3.2HF Solder Paste for Fine Feature Printing at SEMICON Taiwan


Reading time ( words)

Indium Corporation will feature its Indium3.2HF Solder Paste at SEMICON Taiwan 2017 in Taipei, Taiwan.

Indium Corporation’s Indium3.2HF is an air or nitrogen reflow, water-soluble solder paste specifically formulated for fine feature printing applications (Type 6SG).

Indium3.2HF is formulated to offer consistent, repeatable printing performance combined with a long stencil life. In addition, Indium3.2HF delivers:

  • Good response-to-pause
  • Wide reflow profile window
  • Outstanding slump resistance
  • Excellent wetting capability
  • Superior fine-pitch soldering ability

From water-soluble solder pastes to ultra-low residue, no-clean fluxes, Indium Corporation has an industry-proven portfolio of products that meet the current and evolving challenges encountered in fine-pitch SiP applications.

For more information on Indium Corporation’s materials for SiP or Indium3.2HF Solder Paste, go to www.indium.com/SiP or visit Indium Corporation’s booth 2412.

For more information about Indium Corporation, click here.

Share


Suggested Items

Video from productronica 2017: Mycronic Discusses Precision Jetting Systems

11/17/2017 | I-Connect007
From the show floor during productronica 2017, Clemens Jargon, VP of Global Dispensing at Mycronic, discusses with I-Connect007 Technical Editor Pete Starkey the company’s portfolio of precision jetting equipment, with particular reference to the speed and versatility of the MYSmart series.

Solder Preforms 101: Ask the Expert

11/13/2017 | Patty Goldman, I-Connect007
At the recent SMTA International 2017 event, Jerry Sidone, product manager for the engineered materials at Alpha Assembly Solutions, speaks with I-Connect007 Managing Editor Patty Goldman about the voiding challenge, especially with bottom termination components, and how solder technologies from Alpha are helping PCB assemblers address this issue.

HDI Considerations: Interview with ACDi's Garret Maxson

11/10/2017 | Stephen Las Marias, I-Connect007
Garret Maxson, manager of engineering services at American Computer Development Inc. (ACDi), discusses the PCB assembly challenges when dealing with high-density interconnect (HDI) boards, parameters to consider, and strategies to help facilitate a smooth assembly process when using HDI boards.



Copyright © 2017 I-Connect007. All rights reserved.