Alpha to Present Leading Edge Products at ER-SA Elektrik Customer Seminar in Turkey


Reading time ( words)

Alpha Assembly Solutions will be presenting information on its latest product innovations at a seminar hosted by ER-SA Elektrik, Alpha’s distributor partner for Turkey, in Aselsan, Turkey, on September 11, 2017.

Alpha’s latest technology developments including ALPHA Sintering Technology, a range of products designed to meet the demanding quality standards of the power semiconductor and LED industry, will be discussed during the event. Alpha’s Sinter Technology products include ALPHA Argomax which has been specially designed for low pressure sintering die attachment.

“ALPHA Argomax in paste, film and preform technologies, provides high thermal and electrical conductivity silver bonds, high reliability and flexible bondline thickness,” explains Julien Joguet, Global Product Manager for Sintered Materials for Alpha Assembly Solutions, a MacDermid Performance Solutions business. “This addresses issues with die attach reliability in high volume manufacturing and challenging Si/SiC/GaN die attach processes.”

As well as advancements in sintering technologies, Alpha’s latest new cleanable, no-clean material, ALPHA OM-347 solder paste, will be discussed at the seminar. The product has been designed to print and reflow Type 4 and Type 5 powder to meet market segments requiring ultra-fine feature applications. ALPHA OM-347 has been tested to give excellent printing performance and an outstanding reflow process window. After reflow, the resulting residue produced can be safely left on the board, or if needed, it can be very easily cleaned with a broad range of solvents.

About ER-SA Elektrik

ER-SA Elektrik have 12 years’ experience supplying electronic assembly materials across Turkey. The company, which is mainly based in the Istanbul area, has sites throughout the country, including a site in Ankara which opened at the beginning of 2015. This site includes a team of 4 people dedicated to selling Alpha products.

About Alpha Assembly Solutions

Alpha Assembly Solutions, a MacDermid Performance Solutions Business, is the global leader in the development, manufacturing and sales of innovative specialty materials used in a wide range of industry segments, including electronics assembly, power electronics, die attach, LED lighting, photovoltaics, semiconductor packaging, automotive and others.

With a unique global presence in over 30 locations throughout the Asia Pacific, Americas and Europe regions, Alpha supplies a full line of ALPHA electronics assembly material products, including Solder Paste, Exactalloy Solder Preforms, Cored Solder Wire Solder, Wave Soldering Fluxes, Bar Solder Alloys, and Stencils.  It offers die attach product technologies to the power electronics segment in its Argomax, Atrox and Fortibond brands.

For the LED segment, Alpha offers its Lumet products covering applications from die attach to systems assembly in the LED manufacturing process.  Alpha also offers product technologies for the Photovoltaic segment, including high performance liquid fluxes and solder alloys for producing standard ribbon and bus bar, as well as, solder pastes, cored wire, conductive adhesives and preforms for use in PV module assembly. Also, Alpha’s Advanced Materials unit is the leader in electronic polymers and solder materials for semiconductor packaging applications. 

Since its founding in 1872, Alpha has been committed to developing and manufacturing the highest quality specialty materials.  For more information, click here.

Share


Suggested Items

PCB Pad Repair Techniques

01/08/2018 | Bob Wettermann, BEST Inc.
There are a variety of reasons behind pads getting "lifted" completely or partially from the laminate of a PCB. Per the just revised IPC-A-610 Revision G, a defect for all three classes occurs when the land is lifted up one or more pad thicknesses. Lifted pads can occur when a device has been improperly removed or there is a manufacturing defect in the board construction. In any case, as with any repair, the ultimate decision on the ability to repair the pad lies with the customer.

Top 10 Most-Read SMT007 Columns of 2017

01/02/2018 | I-Connect007
Another year is over in the SMT industry. 2017 saw a myriad of hot topics, including Industry 4.0, the millennials’ entry into the manufacturing space, and alternative solder materials, to name a few. Without further ado, here are the Top 10 columns from SMT007 over the past year.

The Effect of Area Shape and Area Ratio on Solder Paste Printing Performance

12/28/2017 | Stefan Härter, et al.
The ongoing miniaturization trend in the SMT production induces new challenges and highly integrated systems. In passive components, the miniaturization leads to the introduction of the EIA size 01005 or smaller. Despite numerous publications in this field already addressing the printing of such devices, a defined wholly optimized process remains unsolved and inspires further novel research ideas on this topic.



Copyright © 2018 I-Connect007. All rights reserved.