Cybertronic's MRS Technology in SQ3000 3D AOI Featured at productronica India


Reading time ( words)

CyberOptics Corporation today announced plans to exhibit at productronica India, scheduled to take place Sept. 14-16, 2017 at the Pragati Maidan in New Delhi. The company will demonstrate the SQ3000 3D Automated Optical Inspection (AOI) system with the new Ultra-High-Resolution Multiple-Reflection Suppression (MRS) Sensor in the Maxim SMT Booth #1130, Hall #11. The company also will showcase its QX250i double-sided AOI and SE500ULTRA high-speed AOI.

The best-in-class SQ3000 3D AOI system maximizes ROI and line utilization with multi-view 3D sensors that capture and transmit data simultaneously and in parallel, accelerating 3D inspection speed versus alternate technology. The proprietary MRS sensor technology with the highly sophisticated 3D fusing algorithms offers microscopic image quality at production speeds.

The new Ultra-High Resolution MRS sensor will be featured on the SQ3000™ 3D AOI. This sensor enhances the SQ3000 3D AOI platform, delivering superior inspection performance, ideally suited for the 0201 metric process and micro-electronic applications where an even greater degree of accuracy and inspection reliability is critical.

Also on display, the QX250i simultaneous double-sided AOI system offers fast, flexible and high performance inspection for all applications, and is ideally suited for pre-reflow and selective solder inspection. The top and bottom high-resolution Strobed Inspection Modules (SIMs) with enhanced illumination provide a single platform for the inspection and defect review process that shortens the production line and drives approximately 50 percent productivity improvement.

The SE500ULTRA system is power-packed with the newly designed V5 series software enabling world-class user experience and optional dual illumination sensor. An all-new, improved ultrafast sensor combined with a unique ‘all-in-one’ scan technique – that integrates fiducial, barcode and range scans into one, seamless scan sequence – makes the SE500ULTRA 30 percent faster at 210cm²/sec. You can choose the Dual Illumination sensor option for best repeatability and reproducibility results – even on the smallest paste deposits.

The SE600 3D SPI system delivers ‘true’ volume measurement and world-class usability. Designed with a state-of-the-art dual illumination sensor, it offers the best repeatability and reproducibility – even on the smallest paste deposits. The award-winning software offers full touch screen capability and world-class user experience for easy, flawless inspection.

About CyberOptics

CyberOptics Corporation (NASDAQ: CYBE) is a leading global developer and manufacturer of high precision sensing technology solutions. CyberOptics sensors are being used in general purpose metrology and 3D scanning, surface mount technology (SMT) and semiconductor markets to significantly improve yields and productivity. By leveraging its leading edge technologies, the company has strategically established itself as a global leader in high precision 3D sensors, allowing CyberOptics to further increase its penetration of its key vertical markets. Headquartered in Minneapolis, Minnesota, CyberOptics conducts worldwide operations through its facilities in North America, Asia and Europe.

For more information, click here.  

Share


Suggested Items

Mycronic Announces the Acquisition of Vi TECHNOLOGY

02/21/2018 | Barry Matties, I-Connect007
Mycronic recently announced the acquisition of Vi TECHNOLOGY, with the intent of combining VIT’s inspection technology with Mycronic’s jetting capabilities. In an interview with I-Connect007, Olivier Pirou, Managing Director of VIT, discusses more about the merger and how this will help VIT contend in such a competitive environment.

Improving Design, Manufacturing and Assembly Teamwork

01/15/2018 | Syrma Technology
Many electronics manufacturers tend to compartmentalize or "silo" their departments, such as the design team versus assembly-related functions. The relationship between design and manufacturing can too often be disconnected or otherwise poor, which stalls productivity and increases bottom-line costs. By identifying and addressing these gaps, this financial hemorrhage can be reduced, and profitability increased.

Recent Innovations in DFMA

01/10/2018 | Syrma Technology
Software, electronics and sensors are making their way into the world of product design. New composites, plastics and alloys are replacing traditional metals. Designs are even reducing the carbon footprint of manufacturers, and more products can be recycled when they reach the end of their use.



Copyright © 2018 I-Connect007. All rights reserved.